A comparative study of demand forecasting techniques for military helicopter spare parts

This paper deals with techniques applicable to predicting spare parts demand for military helicopters. The military helicopter is a distinct weapons system, whose unique configuration may preclude the direct application of forecasting techniques which have proved successful for other weapon systems. Furthermore, although the military helicopter has become extremely important tactically in modern warfare, it has received scant attention in terms of research concerning its supply support. Specifically, this paper summarizes research done to measure and compare the forecasting accuracy of six mathematical models, as they were applied to three prominent military helicopters. In addition, the paper describes attempts that were made to define, where possible, the conditions under which a specific forecasting technique might be applicable. In general, it is shown that the most accurate set of helicopter spare parts demand forecasts are produced by a second order polynomial exponential smoothing model. This model is observed to have most accurately described the highly volatile, and upward-trended demand time series which were the subject of the study.     

基于备件需求预测的两步法理论?

在对备件需求时间序列研究的基础上,结合指数平滑法和Croston法的特点,分析了指数平滑法与两步法的原理,通过对指数平滑法和两步法方差的研究,得到两步法是指数平滑法的一般形式的结论,为两步法的进一步研究提供一定的理论支撑。     

基于指数平滑法的装备维修器材需求量预测

准确地预测维修器材需求量是制定装备保障计划的重要依据.针对装备维修器材需求量预测相对不够准确的问题,通过对两种预测方法进行比较,引入了适用于准确预测的指数平滑方法,建立了基于指数平滑法的装备维修器材需求量预测模型,介绍了确定初始值的方法,并以某种维修器材需求量预测为例进行了分析,为准确预测装备维修器材需求量提供了一种较为科学合理的方法.     

The cost impact of using simple forecasting techniques in a supply chain

In this paper we consider an inventory model in which the retailer does not know the exact distribution of demand and thus must use some observed demand data to forecast demand. We present an extension of the basic newsvendor model that allows us to quantify the value of the observed demand data and the impact of suboptimal forecasting on the expected costs at the retailer. We demonstrate the approach through an example in which the retailer employs a commonly used forecasting technique, exponential smoothing. The model is also used to quantify the value of information and information sharing for a decoupled supply chain in which both the retailer and the manufacturer must forecast demand. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 388–411, 2003     

Demand forecasting by temporal aggregation

Demand forecasting performance is subject to the uncertainty underlying the time series an organization is dealing with. There are many approaches that may be used to reduce uncertainty and thus to improve forecasting performance. One intuitively appealing such approach is to aggregate demand in lower‐frequency “time buckets.” The approach under concern is termed to as temporal aggregation, and in this article, we investigate its impact on forecasting performance. We assume that the nonaggregated demand follows either a moving average process of order one or a first‐order autoregressive process and a single exponential smoothing (SES) procedure is used to forecast demand. These demand processes are often encountered in practice and SES is one of the standard estimators used in industry. Theoretical mean‐squared error expressions are derived for the aggregated and nonaggregated demand to contrast the relevant forecasting performances. The theoretical analysis is supported by an extensive numerical investigation and experimentation with an empirical dataset. The results indicate that performance improvements achieved through the aggregation approach are a function of the aggregation level, the smoothing constant, and the process parameters. Valuable insights are offered to practitioners and the article closes with an agenda for further research in this area. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 479–498, 2013     

模拟训练系统中CGF的号手操作技能建模

针对模拟训练系统对CGF真实性的要求,从号手的操作技能入手,建立可以反映真实训练水平的号手操作技能模型。在分析操作技能相关原理和规律的基础上,采用时间序列分析的方法对其进行预测。采用了指数平滑预测模型,详细分析了其原理,并针对其在实际应用中的缺陷进行了改进。最后,通过两个实际案例验证了模型的可用性和可信性。所建模型反映了号手的操作技能,为模拟训练系统中CGF的真实性研究提供新的思路和方法。     

神经网络在雷达装备故障趋势预测中的应用

为了提高预测精度,在雷达装备状态监测与故障趋势预测系统中引入基于指数衰减的神经网络预测模型。通过普通BP网络预测模型引出基于指数衰减的神经网络预测模型,经验证预测精度较高。并介绍了雷达装备状态监测与故障趋势预测系统构成,此系统对于雷达装备的早期故障预测和预防性维修具有重要意义。     

基于备件需求预测的两步法理论

在对备件需求时间序列研究的基础上,结合指数平滑法和Croston法的特点,分析了指数平滑法与两步法的原理,通过对指数平滑法和两步法方差的研究,得到两步法是指数平滑法的一般形式的结论,为两步法的进一步研究提供一定的理论支撑。     

On the effectiveness of top‐down strategy for forecasting autoregressive demands

We investigate the relative effectiveness of top‐down versus bottom‐up strategies for forecasting the demand of an item that belongs to a product family. The demand for each item in the family is assumed to follow a first‐order univariate autoregressive process. Under the top‐down strategy, the aggregate demand is forecasted by using the historical data of the family demand. The demand forecast for the items is then derived by proportional allocation of the aggregate forecast. Under the bottom‐up strategy, the demand forecast for each item is directly obtained by using the historical demand data of the particular item. In both strategies, the forecasting technique used is exponential smoothing. We analytically evaluate the condition under which one forecasting strategy is preferred over the other when the lag‐1 autocorrelation of the demand time series for all the items is identical. We show that when the lag‐1 autocorrelation is smaller than or equal to 1/3, the maximum difference in the performance of the two forecasting strategies is only 1%. However, if the lag‐1 autocorrelation of the demand for at least one of the items is greater than 1/3, then the bottom‐up strategy consistently outperforms the top‐down strategy, irrespective of the items' proportion in the family and the coefficient of correlation between the item demands. A simulation study reveals that the analytical findings hold even when the lag‐1 autocorrelation of the demand processes is not identical. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

Inventory control and periodic price discounting campaigns

This paper develops an inventory model that determines replenishment strategies for buyers facing situations in which sellers offer price‐discounting campaigns at random times as a way to drive sales or clear excess inventory. Specifically, the model deals with the inventory of a single item that is maintained to meet a constant demand over time. The item can be purchased at two different prices denoted high and low. We assume that the low price goes into effect at random points in time following an exponential distribution and lasts for a random length of time following another exponential distribution. We highlight a replenishment strategy that will lead to the lowest inventory holding and ordering costs possible. This strategy is to replenish inventory only when current levels are below a certain threshold when the low price is offered and the replenishment is to a higher order‐up‐to level than the one currently in use when inventory depletes to zero and the price is high. Our analysis provides new insight into the behavior of the optimal replenishment strategy in response to changes in the ratio of purchase prices together with changes in the ratio of the duration of a low‐price period to that of a high‐price period. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

An adaptive forecasting algorithm and inventory policy for products with short life cycles

Products with short life cycles are becoming increasingly common in many industries, such as the personal computer (PC) and mobile phone industries. Traditional forecasting methods and inventory policies can be inappropriate for forecasting demand and managing inventory for a product with a short life cycle because they usually do not take into account the characteristics of the product life cycle. This can result in inaccurate forecasts, high inventory cost, and low service levels. Besides, many forecasting methods require a significant demand history, which is available only after the product has been sold for some time. In this paper, we present an adaptive forecasting algorithm with two characteristics. First, it uses structural knowledge on the product life cycle to model the demand. Second, it combines knowledge on the demand that is available prior to the launch of the product with actual demand data that become available after the introduction of the product to generate and update demand forecasts. Based on the forecasting algorithm, we develop an optimal inventory policy. Since the optimal inventory policy is computationally expensive, we propose three heuristics and show in a numerical study that one of the heuristics generates near‐optimal solutions. The evaluation of our approach is based on demand data from a leading PC manufacturer in the United States, where the forecasting algorithm has been implemented. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Optimal inventory policies in contagious demand models

In the past, contagious distributions have been successfully applied in bacteriology, entomology, and accident statistics. This paper applies the notion of contagious distributions in the inventory control of new products and seasonal or style goods, which have an lying “true contagion” for their demands, namely, the influence of past demands on occurrence of demands. A contagious distribution is derived by assuming a nonstationary Poisson process where the demand rate at any instant depends on the past demands to that instant. Using this contagious distribution, an inventory model is developed seasonal goods and new product lines. Optimal order policies as a function of the initial level and the review period are derived.     

基于改进GM(1,1)模型的导弹贮存可靠性预测方法

针对导弹系统技术复杂、贮存样本量受限、测试数据波动性较大等特点,结合装备的具体情况提出了基于改进GM(1,1)模型的导弹贮存可靠性预测方法。该方法首先利用"对数-幂函数变换"对导弹的历史可靠性数据进行处理,提高数据光滑度,然后依据GM(1,1)模型计算得到可靠性预测值和残差,再利用残差建立残差修正模型,得到残差修正值,减少残差对结果的影响,最后利用残差修正值修正可靠性预测值并还原,求得可靠性最终预测值。实例表明,该改进模型对导弹系统可靠性变化的描述比传统模型更加准确有效,预测结果精度更高,为导弹贮存可靠性预测分析提供了一种有效的改进方法,其算法设计推广性强,可作为其他装备寿命预估的重要工具。     

Optimal disposal policies for a single-item inventory system with returns

We consider a single-item inventory system in which the stock level can increase due to items being returned as well as decrease when demands occur. Returned items can be repaired and then used to satisfy future demand, or they can be disposed of. We identify those inventory levels where disposal is the best policy. It is shown that this problem is equivalent to a problem of controlling a single-server queue. When the return and demand processes are both Poisson, we find the optimal policy exactly. When the demand and return processes are more general, we use diffusion approximations to obtain an approximate model, which is then solved. The approximate model requires only mean and variance data. Besides the optimal policy, the output of the models includes such characteristics as the operating costs, the purchase rate for new items, the disposal rate for returned items and the average inventory level. Several numerical examples are given. An interesting by-product of our investigation is an approximation for the steady-state behavior of the bulk GI/G/1 queue with a queue limit.     

Exact analysis of (R,s, S) inventory control systems with lost sales and zero lead time

We study an (R, s, S) inventory control policy with stochastic demand, lost sales, zero lead‐time and a target service level to be satisfied. The system is modeled as a discrete time Markov chain for which we present a novel approach to derive exact closed‐form solutions for the limiting distribution of the on‐hand inventory level at the end of a review period, given the reorder level (s) and order‐up‐to level (S). We then establish a relationship between the limiting distributions for adjacent values of the reorder point that is used in an efficient recursive algorithm to determine the optimal parameter values of the (R, s, S) replenishment policy. The algorithm is easy to implement and entails less effort than solving the steady‐state equations for the corresponding Markov model. Point‐of‐use hospital inventory systems share the essential characteristics of the inventory system we model, and a case study using real data from such a system shows that with our approach, optimal policies with significant savings in inventory management effort are easily obtained for a large family of items.     

Capacitated warehouse location model with risk pooling

In this article, we introduce the capacitated warehouse location model with risk pooling (CLMRP), which captures the interdependence between capacity issues and the inventory management at the warehouses. The CLMRP models a logistics system in which a single plant ships one type of product to a set of retailers, each with an uncertain demand. Warehouses serve as the direct intermediary between the plant and the retailers for the shipment of the product and also retain safety stock to provide appropriate service levels to the retailers. The CLMRP minimizes the sum of the fixed facility location, transportation, and inventory carrying costs. The model simultaneously determines warehouse locations, shipment sizes from the plant to the warehouses, the working inventory, and safety stock levels at the warehouses and the assignment of retailers to the warehouses. The costs at each warehouse exhibit initially economies of scale and then an exponential increase due to the capacity limitations. We show that this problem can be formulated as a nonlinear integer program in which the objective function is neither concave nor convex. A Lagrangian relaxation solution algorithm is proposed. The Lagrangian subproblem is also a nonlinear integer program. An efficient algorithm is developed for the linear relaxation of this subproblem. The Lagrangian relaxation algorithm provides near‐optimal solutions with reasonable computational requirements for large problem instances. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Optimal service rates of a service facility with perishable inventory items

In this paper we optimally control service rates for an inventory system of service facilities with perishable products. We consider a finite capacity system where arrivals are Poisson‐distributed, lifetime of items have exponential distribution, and replenishment is instantaneous. We determine the service rates to be employed at each instant of time so that the long‐run expected cost rate is minimized for fixed maximum inventory level and capacity. The problem is modelled as a semi‐Markov decision problem. We establish the existence of a stationary optimal policy and we solve it by employing linear programming. Several numerical examples which provide insight to the behavior of the system are presented. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 464–482, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10021     

基于维修器材离散随机需求最佳库存量确定研究

结合装备维修器材保障工作,就维修器材离散随机需求最佳库存量确定进行研究,对其建模进行系统分析,结合修理厂维修器材最佳库存量进行实例计算,以指导维修器材最佳库存量的确定.     

Inventory cost impact of order processing priorities based on demand uncertainty

We evaluate an approach to decrease inventory costs at retail inventory locations that share a production facility. The retail locations sell the same product but differ in the variance of retail demand. Inventory policies at retail locations generate replenishment orders for the production facility. The production facility carries no finished goods inventory. Thus, production lead time for an order is the sojourn time in a single server queueing system. This lead time affects inventory costs at retail locations. We examine the impact of moving from a First Come First Served (FCFS) production rule for orders arriving at the production facility to a rule in which we provide non‐preemptive priority (PR) to orders from retail locations with higher demand uncertainty. We provide three approximations for the ratio of inventory costs under PR and FCFS and use them to identify conditions under which PR decreases retail inventory costs over FCFS. We then use a Direct Approach to establish conditions when PR decreases retail inventory costs over FCFS. We extend the results to orders from locations that differ in the mean and variance of demand uncertainty. The analysis suggests that tailoring lead times to product demand characteristics may decrease system inventory costs. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 376–390, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10016     

A two-station stochastic inventory model with exact methods of computing optimal policies

A method is presented for calculating optimal inventory levels in a two-station transactions reporting inventory system. The criterion of optimality is the minimization of expected cost. The computational properties of the model are stressed and the solution method is precise. It is shown that when the model represents a central warehouse which supplies several retail outlets, stocks carried at the central location affect the capacity of the system to handle orders. Stocks carried at the retail level affect only the size of the retail order backlog.