舰载雷达零位标校新法

对目前现有舰载火控雷达零位标校的方法和技术做了简单概述,提出了一种基于差分GPS、CCD、激光经纬仪等技术相结合的零位标校新法,给出了系统硬件组成和算法原理,对系统误差影响因素做了分析。实践标明此系统可以有效的克服由于舰体的摆动而对测量精度的影响,并极大的改善了标校的灵活性与机动性。标校系统测量真值位置精度优于50 cm,相应真值角度精度优于0.05 mrad,满足舰载雷达标校精度要求。     

基于多线程的CABAC并行编码方法

CABAC(Context based Adaptive Binary Arithmetic Coding)是H.264/AVC主要档次以上配置中推荐采用的熵编码方法.相比其他的熵编码方法,CABAC能够节省编码码率,但其计算串行性强,不能较好适应片上多核环境.针对这一问题提出了基于多线程的CABAC并行编码方法.大量实验统计表明,该方法负载划分较为均衡,对序列熵编码的单独加速比最高可达1.78.     

北斗系统新民用导航电文历书参数算法与性能分析

研究新公布的北斗民用导航电文中的两类历书与北斗二号导航电文历书的差异,对比分析各类历书对接收机首次定位时间的影响。利用实际的历书数据,比较不同历书类型的用户算法,分析不同龄期数据对接收机首次定位性能的影响。结果表明,高精度历书在1周的数据龄期内性能较为稳定,中等精度历书精度稍逊于高精度历书,但由于简化了电文空间,能接近高精度历书性能。简约历书进一步简化了参数数目和电文空间,尽管位置误差达到了数百千米,但却能在数月之后保持相应精度,有利于缩短接收机首次定位时间。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

GPS时分二进制偏移载波调制信号的高精度无偏抗多径算法

二进制偏移载波调制信号将在卫星导航系统中得到广泛应用。全球定位系统的L1C信号导频分量采用了时分二进制偏移载波调制,对此信号直接采用码参考波形算法消除多径时的鉴别曲线收敛点存在偏差,从而影响测距偏差。因此,提出一种时分二进制偏移载波调制信号的高精度无偏抗多径算法。通过时分的方式分别生成针对BOC(1,1)和BOC(6,1)分量的本地闸波,以保证鉴相函数在码相位无偏差时等于0。由于更好地利用了BOC(6,1)信号分量,该技术在实现无偏跟踪的同时,还能提高跟踪精度。     

基于χ~2检验的惯性/卫星紧耦合系统故障检测与隔离方法

研究了一种基于χ~2检验的惯性/卫星紧耦合系统故障检测与隔离方法,该方法可利用故障检测函数自动识别单个卫导故障,并实时剔除故障星重构观测信息序列,从而避免了对紧耦合系统的影响。构建数字化仿真环境对所研究的故障检测与隔离方法进行了仿真,仿真结果表明,该方法可在卫星发生故障时及时检测并隔离故障星,并自动实现观测信息重构,保证了紧耦合系统的精度和完好性。     

载机扰动下SAR/GMTI旋转目标微多普勒特性分析

目标微动部件激励的雷达微多普勒信号稳定而独特,反映了该目标的本质特征。针对采用相位中心偏置技术(DPCA)的SAR/GMTI系统,研究存在载机扰动下的旋转目标的微多普勒特性。构建飞行平台与微动目标的几何模型,推导旋转目标的微多普勒信号模型,分析典型的载机纵向扰动对微多普勒时频特性构成的影响;并通过仿真实验,验证了上述理论分析的正确性。     

基于察打任务的无人机作战效能评估

首先根据时敏目标打击的特点,分析了察打任务模式下的察打一体无人机的作战使用。然后对评估体系中察打一体无人机的侦察能力与打击能力相关性进行了分析,同时将任务可执行度作为无人机效能评估的一项动态权衡标准,建立了基于察打任务的无人机效能评估模型,并基于效能指标体系建立了各分项模型。最后通过算例验证了模型的可行性。     

对GPS接收机的欺骗式干扰试验研究

GPS欺骗式干扰具有发射功率小,抗干扰难度大的特点,分为转发式干扰与产生式干扰。利用卫星信号模拟器产生包含错误导航信息的GPS民用C/A码欺骗信号,通过直接侵入和压制式干扰辅助两种方式进入接收机的捕获跟踪环路,对已定位的某款GPS接收机实施欺骗干扰。试验结果表明,直接侵入方式下,通过合理控制欺骗信号功率,接收机定位被扰乱,但定位结果并未被成功欺骗至预设位置;压制式干扰辅助方式下,接收机成功误定位于预设位置,验证了对GPS接收机进行欺骗式干扰的可行性。