Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.     

Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

Scale-up synthesis and characterization of 2,6-diamino-3,5-dinitropyrazine-1-oxide

2,6-diamino-3,5-dinitropyrazine-1-oxide (ANPZO), as an insensitive high explosive, with a high yield and excellent purity has been prepared at pilot plant scale by an improved method. The synthesized ANPZO is characterized by IR, laser granularity measurement, SEM and HPLC. The particle analysis revealed that the improved method could offer desired product with average particle size of 40 μm and high purity (>98.45%). The experimental parameters exhibited that the detonation velocity of the formulation based on ANPZO was higher than that of the corresponding TATB formulation. The DSC curve showed that the exothermic decomposition of the product occurred at the temperature between 300.5 °C and 360.4 °C. Furthermore, the sensitivity test suggests its safe nature towards mechanical stimulus.     

Analysis on the resistive force in penetration of a rigid projectile

According to the dimensionless formulae of DOP (depth of penetration) of a rigid projectile into different targets, the resistive force which a target exerts on the projectile during the penetration of rigid projectile is theoretically analyzed. In particular, the threshold V_c of impact velocity applicable for the assumption of constant resistive force is formulated through impulse analysis. The various values of V_c corresponding to different pairs of projectile-target are calculated, and the consistency of the relative test data and numerical results is observed.     

某型飞机短周期模态特性分析

对纵向短周期模态方程进行了推导和简化,分析了短周期模态的成因和影响的因素,以某型飞机为例计算了本体的短周期模态参数变化规律,分析了其不足,并提出改进方法并进行了计算验证,得到了较好的结果。     

基于测速定轨的一类自适应样条滤波方法

提出了一种测速定轨的实时算法。该方法基于样条表示飞行轨道速度参数 ,在只有多个测速元信息的情况下 ,建立了自适应Kalman滤波递推算法 ,实时给出了较高精度的飞行器轨道参数     

致伤因素及其对目标综合效应的估算方法

本文综述了致伤因素对目标的致伤效果,取决于击中的部位和释放能量的多少,且随着击中部位和因素的改变而不同。指出各因素对目标的致伤作用既有相互影响又有其独立性。并给出了致伤因素对目标综合效应的估算公式。     

拦截高速机动目标的最优制导律

对于远距离拦截高速、大机动目标,不仅拦截弧段长,拦截飞行时间也更久。拦截弹在飞行过程中的能量管理与优化问题,也是在拦截制导律设计时必须要考虑的问题。将非线性弹目运动关系降阶简化后,运用最优控制理论,将能量管理纳入考虑中,得出针对高速、机动目标的最优制导律,且可以满足终端碰撞角约束。通过引入分段线性和指数两种形式的阻尼,使得导弹在拦截高速高加速目标时,对目标机动的敏感度随弹目距离变化,从而达到能量管理的目的。通过二维非线性仿真验证了制导律的性能。     

Real-time calculation of fragment velocity for cylindrical warheads

To simulate explosion fragments, it is necessary to predict many variables such as fragment velocity, size distribution and projection angle. For active protection systems these predictions need to be made very quickly, before the weapon hits the target. Fast predictions also need to be made in real time simulations when the impact of many different computer models need to be assessed. The research presented in this paper focuses on creating a fast and accurate estimate of one of these variables - the initial fragment velocity. The Gurney equation was the first equation to calculate initial fragment velocity. This equation, sometimes with modifications, is still used today where finite element analysis or complex mathematical approaches are considered too computationally expensive. This paper enhances and improves Breech’s two-dimensional Gurney equation using available empirical data and the principals of conservation of momentum and energy. The results are computationally quick, providing improved accuracy for estimating initial fragment velocity. This will allow the developed model to be available for real-time simulation and fast computation, with improved accuracy when compared to existing approaches.