Reforming China’s defense industry

ABSTRACT

Even with sizable economic inputs, access to foreign technologies, and considerable political will, China, up until the late 1990s, experienced only limited success when it came to the local design, development, and manufacture of advanced conventional weapons. Not surprisingly, therefore, reforming the local defense industry in order to upgrade its technology base and manufacturing capabilities and to make armaments production more efficient and cost-effective has long preoccupied the Chinese leadership. The fact that most of these efforts had little positive impact on the country’s military technological and industrial capabilities only encouraged Beijing to experiment with additional reforms in the hopes of finally getting it right.     

螺旋轮式管道检测机器人越障性能研究

建立了一种螺旋轮式管道检测机器人驱动系统的三维模型，对驱动系统通过凸台和三通的能力进行了动力学分析。研究了预紧弹簧刚度和预紧力对螺旋轮过凸台能力的影响，讨论了过三通时的几何约束和动力学约束条件，并通过算例分析，验证了模型的正确性。     

函数变换提高灰色预测模型精度的条件

指出选择函数变换来提高模型精度主要与三个方面的因素有关：提高数据序列的光滑比、调整数据序列的级比和确保凸凹性。在调整级比方面，扩充了级比压缩变换的相关定理，并讨论了几种常用的函数变换在上述三个方面的关系。最后结合实例提出，对于变换后的数据序列若不满足这三方面的要求可以再进行函数变换以达到提高模型精度的目的。     

Expanding the Dragon’s Reach:The Rise of China’s Anti-access Naval Doctrine and Forces

Among the multiple dimensions of the tous azimuths modernisation of Chinese naval forces, the development of China’s anti-access capacity has recently elicited considerable interest. The important link between this capacity and an overarching vision of the use of force – i.e. a naval doctrine – has, however, often been left implicit. This article shows that the particular development of China’s naval anti-access forces – more precisely, forces with an impact on the naval balance – can be explained by a shift of China’s naval doctrine towards a distinctly pre-emptive posture, which, itself, stems from the set of constraints imposed by the framework of ‘local war under informationised conditions’.     

Hardening the Hard,Softening the Soft: Assertiveness and China’s Regional Strategy

There is a growing view that the emerging brand of Chinese regional diplomacy in recent years is increasingly assertive. This article attempts to make better sense of this perceived more forceful Chinese diplomacy. It argues that Chinese regional behavior is more profitably understood through the lens of a two-pronged foreign policy strategy that combines two particular aspects. One is a tougher and more uncompromising approach toward issues that China regards as concerning its core interests. The other is a more flexible and cooperative position toward interests that, while significant, are of secondary importance.     

基于小弹性模量法的空间飞网构型优化设计

飞网构型设计对提高空间飞网系统的展开抓捕性能具有重要意义。用小弹性模量分析方法对空间飞网构型优化设计问题进行了研究。以绳网中内力分布均衡性为优化目标,选取飞网抛射过程中最大受力时刻为研究工况,赋予绳索单元极小弹性模量,进行静力学计算,并以变形后的结果为初始条件进行迭代分析。优化结果表明,绳网中的内力分布随迭代步数的增加而更趋于均匀。在不改变绳网拓扑结构的前提下,本文所建立的优化设计方法为空间飞网构型优化设计提供了一种参考途径。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。     

反恐怖劫持事件中不同目的谈判语言的运用策略

在反劫持谈判中,为了能够解除现场的那种僵持、对抗、凝固的情形,谈判者就得运用不同目的的语言来使劫持者向预期的方向前进。从理论上讲,每一名谈判人员都希望通过和平的方式解决劫持事件。因此,我们必须学会运用反恐谈判讨价的语言、拖延的语言、劝降的语言和摊牌的语言,来使劫持事件得到和平解决或为武力解救行动创造良好时机。