水顶油顺序输送油水混合模型研究

顺序输送是利用一条管道输送多种油品,因其可最大限度发挥管道输送潜能而被广泛应用。按照前后行液体不同可分为水顶油、油顶水和不同油品间顺序输送等,其中水顶油顺序输送主要用于管道撤收前的排空作业。对水顶油顺序输送油水混合过程进行了分析,建立了油水混合模型,利用CFD对其进行数值求解,并将仿真结果与前期理论分析进行了对比,两者吻合较好。所得结论可为机动管线水顶油排空作业提供科学指导。     

燃烧室-喷管流场数值解

本文用时间相关法计算了固体火箭发动机燃烧室─喷管亚跨声速流场数值解,控制方程用ＭａｃＣｏｒｍａｃｋ二步显格式：边界点参数用物理边界条件和参考平面上的特征方程计算。计算表明,达到收敛的数值积分步数比纯喷管的跨声速计算要多得多。虽然喷管壁上和轴线上的马赫数分布与纯喷管计算类似,但喷管中的等马赫线分布与纯喷管计算的结果［３］相差较远。     

双脉冲发动机隔板优化方案研究

在双脉冲发动机地面试车过程中,隔板结构引起了Ⅰ脉冲燃烧室壁面烧穿的问题。利用Fluent流场分析软件,分析了金属膜片式隔板对双脉冲发动机流场特征的影响;通过对计算结果的分析,对比2种隔板结构的优劣,为隔板优化提供参考。     

空军网络化指挥信息系统作战效能评估指标体系构建?

针对目前网络化指挥信息系统作战效能评估指标体系不完善、且缺乏分项指标计算方法模型等问题,从网络化作战对指挥信息系统的作战需求出发,研究构建了空军网络化指挥信息系统的作战效能评估指标体系,并提出了分项指标概念内涵和计算模型与方法,可为指挥信息系统研制提供参考和支撑,为其作战效能的客观评估提供指标体系和模型方法。     

机动发射条件下助推滑翔导弹射击诸元快速解算

针对机动发射条件下助推滑翔导弹对全程弹道快速生成的迫切需求,在弹道设计中选取7个关键性控制量参数作为全程弹道射击诸元,并提出与之相对应的诸元解算算法。将全程弹道分为助推段、初始下降段、滑翔段和俯冲攻击段,在统一化运动模型描述的基础上,运用参数化迭代的思路,依次对不同飞行阶段诸元进行了快速求解,满足多种复杂约束条件。在全程诸元迭代解算模式的基础上,提出助推段沿用中心弹道诸元,仅对其他射击诸元进行重计算的部分诸元迭代解算模式。仿真结果表明:采用所提助推滑翔导弹射击诸元快速解算方法,可在大范围机动条件下对远距离地面固定目标进行快速精确打击。     

Effects of lethality in naval combat models

In the context of both discrete time salvo models and continuous time Lanchester models we examine the effect on naval combat of lethality: that is, the relative balance between the offensive and defensive attributes of the units involved. We define three distinct levels of lethality and describe the distinguishing features of combat for each level. We discuss the implications of these characteristics for naval decision‐makers; in particular, we show that the usefulness of the intuitive concept “more is better” varies greatly depending on the lethality level. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A unified model incorporating yield,burn‐in,and reliability

The correlated improvement in yield and reliability has been observed in the case studies on integrated circuits and electronic assemblies. This paper presents a model that incorporates yield and reliability with the addition of a burn‐in step to explain their correlated improvement. The proposed model includes as special cases several yield and reliability models that have been previously published and thus provides a unifying framework. The model is used to derive a condition for which yield functions can be multiplied to obtain the overall yield. Yield and reliability are compared as a function of operation time, and an analytical condition for burn‐in to be effective is also obtained. Finally, Poisson and negative binomial defects models are further considered to investigate how reliability is based on yield. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Dynamic inventory and pricing models for competing retailers

We address infinite‐horizon models for oligopolies with competing retailers under demand uncertainty. We characterize the equilibrium behavior which arises under simple wholesale pricing schemes. More specifically, we consider a periodic review, infinite‐horizon model for a two‐echelon system with a single supplier servicing a network of competing retailers. In every period, each retailer faces a random demand volume, the distribution of which depends on his own retail price as well as those charged by possibly all competing retailers. We also derive various comparative statics results regarding the impact several exogenous system parameters (e.g., cost or distributional parameters) have on the equilibrium decisions of the retailers as well as their expected profits. We show that certain monotonicity properties, engrained in folklore as well as in known inventory models for centralized systems, may break down in decentralized chains under retailer competition. Our results can be used to optimize the aggregate profits in the supply chain (i.e., those of the supplier and all retailers) by implementing a specific wholesale pricing scheme. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

电磁发射超高速弹丸气动特性数值分析

采用数值计算方法研究了超高速弹丸的气动流场特性,重点分析了弹丸再入段的气动流场特性.利用风洞试验数据验证了S-A和k-ωSST湍流模型的预测精度,计算结果表明,在法向力预测上,两种湍流模型的预测精度较高,均在2％以内.在轴向力预测上,S-A湍流模型的预测精度较高,误差约为4.6％.当弹丸以大攻角再入时,弹丸横流效应较为...