陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

复合推进剂中硝酸铵的改性研究

在分析硝酸铵的多晶现象和吸湿特性的基础上 ,探讨了硝酸铵的改性技术。采用热分析法研究了无机添加剂对硝酸铵晶型转变的影响 ,并用高分子表面处理剂对硝酸铵进行表面处理。结果表明 ,这种方法可以有效地改善硝酸铵的晶体结构和吸湿特性 ,为硝酸铵在复合推进剂中的应用提供了实验和理论依据。     

计及开关抖动特性的低压复合开关仿真分析

为了改进复合开关特性,准确评估复合开关中电力电子器件的发热水平,以低压复合开关为研究对象,建立了开关的抖动仿真模型,并在此基础上分析了负载条件下复合开关中双向可控硅本身及其考虑底板散热影响后的温升特性.通过加入散热片,大大减少了复合开关的发热量.研究结果为可靠地控制复合开关、延长其寿命提供了条件,并为进一步开发多路集成...     

Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

The Armoury Gauging System and Interchangeable Manufacture

Abstract

Scientifically analysing important artefacts from the site of historic battles is vital if the best information is to be retrieved from the field. A detailed knowledge of the specific equipment that was available to the combatants from a known battle is also required at a high level so that artefacts and fragments resulting from an historic battlefield archaeological survey can be recognised when found. Access to specialists from all walks of life is required throughout each battlefield-related project, from the fieldwork stages to the dissemination of information. The following paper discusses the importance of working alongside museums and specialists and gives examples of how the Towton Battlefield Archaeology Project has successfully worked with the staff at the Royal Armouries Leeds.     

新型夜瞄复合荧光材料在步兵轻武器中的应用研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料.试验研究和实际使用结果表明,研制的新材料发光时间长、亮度高,具有良好的耐温、耐腐蚀性能,不受轻武器的日常使用和维护影响,可满足步兵轻武器夜间瞄准需求.     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

纤维缠绕复合材料夹芯圆柱体高应变率压缩吸能机理

为研究纤维缠绕复合材料夹芯圆柱体吸能元件在高应变率冲击压缩载荷作用下的变形损伤模式和能量吸收机理,采用ABAQUS商用有限元软件和分离式Hopkinson压杆装置开展数值模拟分析和试验验证研究。对比分析宏观力学响应规律和微观损伤破坏机理,可知吸能结构元件在高应变率压缩载荷下的力学响应具有典型的弹塑性特征,内部芯材主要产生压缩塑性损伤,而表层复合材料沿环向产生拉伸断裂破坏。研究表明,该吸能元件冲击压缩吸能特性优异,可满足水下结构平台的冲击防护和浮力储备要求。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.