基于模型参数辨识的动力调谐陀螺故障诊断方法

提出了基于动调陀螺转子动力学模型参数辨识的陀螺故障诊断方法 ,详细探讨了其中的关键技术 ,并以某型捷联惯导系统中的动调陀螺为对象 ,在实测信号的基础上进行了故障仿真与实际诊断。结果表明该方法能有效地诊断动调陀螺故障 ,具有一定的实际应用价值 ,并为陀螺故障诊断研究提供了新的途径和思路。     

基于正交试验设计的内燃机缸套和活塞环磨合过程数学模型的建立

在对内燃机缸套和活塞环磨合过程进行试验研究的基础上,提出了基于正交试验设计的内燃机缸套-活塞环磨合过程磨损量和磨合时间的数学模型,并对试验结果进行了多元正交多项式回归分析,进而利用磨合过程的数学模型分析了各影响因素对磨合过程的影响.磨合模型的建立对确定合理的磨合时间和磨合规范,提供了理论和方法的依据.     

具有倒“Y”型吊挂的降落伞系统动力学建模

具有倒"Y"型吊挂的降落伞系统在回收领域具有广泛的应用.建立了这类系统的动力学模型,包括考虑附加质量的一般刚体动力学方程和基于"平衡点"假设的吊挂系统建模方法.利用该模型对某型飞船空投试验情况进行了仿真分析,通过与试验数据对比,验证了模型的有效性.     

电磁轨道发射装置动态电感梯度分析

推导了导轨间磁场均匀分布和非均匀分布两种情况下电感梯度数学计算模型。引入了速度频率来模拟电枢发射过程速度趋肤效应,对导轨二维模型以及三维电磁场模型进行时谐仿真,并将获得的单位长度电感以及电感梯度,分别用于电气仿真系统中电感和电枢推力的计算。电气仿真和试验结果表明,电流和出口速度误差均在2%以内,证明了动态电感梯度分析及参数提取方法的正确性和准确性。     

Bayesian selling problem with partial information

We introduce an optimal stopping problem for selling an asset when the fixed but unknown distribution of successive offers is from one of n possible distributions. The initial probabilities as to which is the true distribution are given and updated in a Bayesian manner as the successive offers are observed. After receiving an offer, the seller has to decide whether to accept the offer or continue to observe the next offer. Each time an offer is observed a fixed cost is incurred. We consider both the cases where recalling a past offer is allowed and where it is not allowed. For each case, a dynamic programming model and some heuristic policies are presented. Using simulation, the performances of the heuristic methods are evaluated and upper bounds on the optimal expected return are obtained. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Statistical equivalency and optimality of simple step‐stress accelerated test plans for the exponential distribution

Accelerated life testing (ALT) is commonly used to obtain reliability information about a product in a timely manner. Several stress loading designs have been proposed and recent research interests have emerged concerning the development of equivalent ALT plans. Step‐stress ALT (SSALT) is one of the most commonly used stress loadings because it usually shortens the test duration and reduces the number of required test units. This article considers two fundamental questions when designing a SSALT and provides formal proofs in answer to each. Namely: (1) can a simple SSALT be designed so that it is equivalent to other stress loading designs? (2) when optimizing a multilevel SSALT, does it degenerate to a simple SSALT plan? The answers to both queries, under certain reasonable model assumptions, are shown to be a qualified YES. In addition, we provide an argument to support the rationale of a common practice in designing a SSALT, that is, setting the higher stress level as high as possible in a SSALT plan. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

用于目标跟踪无线传感器网络的动态分簇算法

针对跟踪精度和网络能耗的问题,提出了一种用于目标跟踪无线传感器网络的基于预测的动态分簇算法.把目标运动过程看作是高斯马尔可夫过程,根据目标历史轨迹,估计下一时刻位置坐标和运动速度,然后基于估计结果优化选择分簇的簇头和簇成员,形成一个动态分簇来实现目标跟踪.仿真结果表明:该算法使目标跟踪有较好的跟踪精度,能有效均衡网络能耗,延长网络寿命.     

同时验证整装和分系统固有可用度的试验方案

针对整装和分系统可用度同时需要验证的问题,假设单系统可用度、可靠性和维修性试验方案都已知,以试验样本量确定方法为研究重点,以同时验证整装和分系统的可用度、平均故障间隔时间和平均修复时间等3个指标参数为设计要求,提出了一种定数截尾试验方案.该方案包括2种试验方式.2种试验方式都能够完成对整装和分系统3个指标参数的验证.     

动态点对点通信天线的自动控制研究

在相对运动平台的点对点通信中,天线如何快速、准确地进行跟踪对准是接收高质量通信信号的保证.针对于动态点对点通信中定向天线对准难的问题,提出了一种基于坐标跟踪法和信号跟踪法的联合天线跟踪控制法,并对此方法进行了系统的软、硬件设计.通过精度分析和试验得出该方法对准精度高,系统易于实现,能够满足微波通信天线对准工程实现中的快与准的要求.     

卫星导航弱信号的变维卡尔曼滤波跟踪算法

复杂环境下的多普勒频移变化及信号功率衰减均会造成载波跟踪偏差较大甚至失锁,针对标准卡尔曼滤波算法跟踪机动目标时不能同时满足高动态及高灵敏度要求的问题,提出一种基于变维卡尔曼滤波的载波跟踪算法。引入机动和非机动两种载波跟踪模型,通过机动检测因子监视载波动态变化,实时高效地切换载波跟踪模型,从而实现对载波机动和非机动状态的自适应跟踪,抑制机动改变引起的较大误差突跳。理论分析和仿真结果表明,该算法在低至30d BHz弱信号环境下,相比基于标准卡尔曼滤波的跟踪算法,其在目标动态突变时相位跟踪误差减小约37.5%,频率跟踪误差减小约77%。