步兵轻武器新型夜瞄复合荧光材料的性能研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料.通过试验分别研究了新材料的发光性能、耐温性能、耐腐蚀性能和耐表面处理性能.试验结果表明,研制的新型夜瞄复合荧光材料发光时间长、亮度高,具有良好的耐温、耐腐蚀性能,不受武器表面处理的影响,可满足步兵轻武器夜间瞄准需求.     

极性基团对环氧树脂基体力学性能及吸水特性的影响

研究了CYD- 128/THPA/DMP- 30 (CTD)、TDE- 85/THPA/DMP- 30(TTD)、CYD- 128/IPDA(CI)与TDE- 85/IPDA (TI)4种环氧树脂基体浇铸体的拉伸、弯曲和耐海水性能,分析了树脂、固化剂类型和分子结构对树脂基体性能的影响.结果表明,使用相同固化剂时,TDE...     

初始和终止库存不为零的生产与库存问题

针对初始库存和终止库存不为零的生产与库存问题,通过适当设置需求量,将其化为初始库存和终止库存为零的问题,以便应用重生性质进行求解。     

921A钢在海水中腐蚀的力学化学效应

为了研究弹性应力和弹塑性应变对921A船体钢在模拟海水中腐蚀行为的影响,采用自制的载荷-电化学实验装置对921A钢在载荷与腐蚀介质协同作用时的开路电位、动电位极化曲线和电化学阻抗谱等电化学性能进行了测试,并由电化学阻抗谱拟合得到的电荷传递电阻定义载荷下的腐蚀速率修正因子,将实验得到的腐蚀速率修正因子与理论值进行了对比。结果表明:弹性拉应力与弹性压应力对力学化学效应的影响具有对称性。力学化学效应随着弹性应力的增大而增大,随着弹塑性应变的增大先增大后减小。弹塑性应变对力学化学效应的影响远远大于弹性应力的影响。在研究范围内,弹塑性应变引起的腐蚀电位负移量最大为62.6 mV,相应的腐蚀速率修正因子高达4.113,而弹性应力引起的腐蚀电位负移量最大为24.5 mV,相应的腐蚀速率修正因子为1.746。由此可见,应力应变对921A钢在海水中腐蚀行为的影响不容忽视。     

聚(2-甲氧基-5-丁氧基)亚苯基亚乙烯的合成及电性能

本文用对甲氧基苯酚、正溴丁烷、聚甲醛为原料， 经醚化， 双氯甲基化和碱性消除反应， 合成出长链共轭且可溶的聚（２甲氧基５丁氧基）亚苯基亚乙烯，用 Ｉ Ｒ 和１ Ｈ Ｎ Ｍ Ｒ 表征了中间体和聚合物的结构，并测定了聚合物的伏—安特性曲线。     

Synergistic effect of hybrid Himalayan Nettle/Bauhinia-vahlii fibers on physico-mechanical and sliding wear properties of epoxy composites

The cellulosic bast fibers are recognized as a justifiable and biodegradable substitute for producing moderate strength polymer composite materials because of their characteristics of renewability, eco-friendliness, and higher specific strength. Hence the aim of this research work is to fabricate Himalayan bast fibers (Nettle fiber (NF)/bauhinia vahlii fiber (BF)) based mono/hybrid epoxy composites at varying weight percentage of 2–6 wt% and evaluate the physical (void fraction and water absorption), mechanical (tensile strength, flexural strength, hardness) and sliding wear properties of as-fabricated composites. The 6 wt% NBF reinforced composites exhibited higher mechanical properties as compared to NF and BF composites with tensile strength of 34.04 MPa, flexural strength of 42.45 MPa, and hardness of 37.01 H_v respectively. The influence of various control factors (sliding velocity, NF/BF/NBF contents, normal load and sliding distance) on specific sliding wear rate of composites was evaluated by Taguchi (three factors at three levels) experimental design and the percentage contribution of these selected parameters on sliding wear performance was examined by Analysis of variance (ANOVA). The sliding wear property of as-developed composites was found to be greatly influenced by sliding velocity and the wear resistance was observed to be improved with the NF/BF/NBF contents. The wear mechanism of the as-fabricated composites has been elucidated by scanning electron microscopy analysis. The research outcomes demonstrated that the hybridization of Bauhinia vahlii fiber with Nettle fiber led to improve the mechanical and wear properties of epoxy composites.     

Liquid phase in-situ synthesis of LiF coated boron powder composite and performance study

Among practical metal additives, boron (B) has a high volumetric heating value, making it a promising choice as a fuel additive. Although B can theoretically yield a large amount of energy upon complete combustion, its combustion is retarded by the initial presence of B oxide, which coats the surfaces of B particle. To improve the ignition and combustion properties of B powder, LiOH and NH₄F were used as precursors to synthesize uniformly LiF-coated B composites (LiF-B) in situ. The LiF-B mixture was also prepared for comparison using a physical method. X-ray diffraction (XRD), Fourier-transform infrared (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to characterize the morphologies and compositions of the products. The thermal and combustion properties of the samples were characterized by thermal gravity-differential thermal gravity (TG-DTG), differential scanning calorimetry (DSC) and closed bomb experiment. The XRD, FTIR, SEM and EDS results demonstrated the successful preparation of the coated LiF-B sample. The TG-DTG and closed bomb experiment results indicated that the addition of LiF decreased the ignition temperature of B powder, and increasing its reaction efficiency. DSC results show that when LiF-B was added, the released heat of underwater explosive increased by 6727.2, 7280.4 and 3109.6 J/g at heating rates of 5, 10, and 15 °C/min, respectively. Moreover, LiF-B decreased the activation energy of secondary combustion reaction of explosive system as calculated through Kissinger's method by 28.9%, which indicated an excellent catalytic effect for the thermal decomposition of underwater explosive. The results reveal that LiF can improve the combustion efficiency of B powder, thereby increasing the total energy of explosives. The mechanical sensitivity increased slightly after adding LiF-B to the underwater explosive. Compared to the underwater explosive with added B, the mechanical sensitivity of the explosive with added LiF-B was significantly lower.     

固体火箭发动机复合材料壳体裙黏接性能分析

采用数值计算方法研究复合材料壳体裙连接结构的黏接性能。通过建立纤维缠绕壳体的有限元模型,采用内聚力模型定义裙黏接面的接触关系,引入黏接界面的损伤失效准则,模拟黏接界面的脱黏行为,以此预测裙连接结构的极限承载。同时,研究壳体的轴向和环向应变及黏接面上的剪应力分布情况,以及弹性层的弹性模量与黏接长度对黏接性能的影响。数值算例表明,计算结果与实验数据相吻合,验证了该方法的正确性。所提方法可用于裙连接结构的优化设计中。     

战场目标声音识别关键技术研究

战场目标声音探测技术在现代战争中发挥着越来越重要的作用。针对战场目标声音识别的一些关键技术进行了研究。首先分析了目标声音探测技术的军事应用特点,然后对战场典型目标发出的噪声的物理特性进行了分析。最后论述了战场目标声音识别技术中的几种关键技术,重点分析了特征提取中的LPCC、MFCC技术以及分类器中的隐马尔可夫模型,为战场目标声音识别系统的开发奠定了基础。     

侧链含锑聚硅烷的合成与性能研究

侧链含锑聚硅烷的合成可通过聚甲基硅烷的高分子反应在室温条件下实现,聚合物产率为75.2%,数均分子量为1600.其分子结构与组成可由元素分析、FT-IR、1H-NMR、29Si CP/MAS NMR、GPC和UV来确认.PSA可溶于一般常见的有机溶剂,紫外吸收的最大波长为330nm,其热分解特性表明,陶瓷收率为80%,可用作SiC陶瓷先驱体;其本体电导率为10-8～10-7S/cm,将其与碘掺杂,电导率可以达到10-5S/cm以上.