考虑定子电阻时十二相同步发电机对称稳态电抗的测定

研究计及定子绕组电阻时十二相同步电机对称稳态电抗的测定,导出了有关计算公式,并在实机上进行了试验．     

考虑损耗情况下定子绕组传输特性

提出了考虑损耗情况下定子绕组传输特性的多导体传输线理论计算方法,该方法能考虑匝间电容、匝间互感的影响。应用于一具体电机样机,在较宽频率范围内,计算结果与实测结果一致     

SHS离心机设计制造中的几个问题

SHS离心机是自蔓延高温合成陶瓷内衬复合钢管的关键技术之一。介绍了JS-1型SHS离心机的组成与结构特点,简述了在设计制造中的几个主要问题。实践证明,该机可成功地制备内径为50～200mm、长度在100～2000mm之间的中小型陶瓷内衬复合钢管。     

跨模态行人重识别的对称网络算法

针对模态间差异,提出基于对称网络的跨模态行人重识别算法,该网络将基于概率分布的模态混淆与对抗学习结合,通过对称网络产生模态不变特征,从而达到模态混淆的目的;针对外观差异和模态内差异,使用不同隐藏层的网络卷积特征构造混合三元损失,提高网络的特征表征能力.RegDB和SYSU-MM01数据集上的大量实验结果表明了该方法的有...     

某型火箭弹安全发射静电防护设计

在分析了电子发火机电路系统工作原理的基础上,对电子发火机部分电路系统进行改进设计,使装填到火箭炮上的火箭弹在新点火电路系统下,两极间产生一条短路通道,具有了短路保护功能。计算结果表明,此设计增强了火箭弹的抗静电能力。     

Polynomial‐time approximation schemes for two‐machine open shop scheduling with nonavailability constraints

This paper addresses a two‐machine open shop scheduling problem, in which the machines are not continuously available for processing. The processing of an operation affected by a non‐availability interval can be interrupted and resumed later. The objective is to minimize the makespan. We present two polynomial‐time approximation schemes, one of which handles the problem with one non‐availability interval on each machine and the other for the problem with several non‐availability intervals on one of the machines. Problems with a more general structure of the non‐availability intervals are not approximable in polynomial time within a constant factor, unless . © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

自燃火灾原因分析认定专家系统的设计特点

结合武警学院科研项目"自燃火灾原因分析认定专家系统"(简称FSAIES)的研制工作,介绍FSAIES系统的基本结构,并通过实例详述了适合于系统开发的知识获取和知识表示方法,重点介绍了系统采用的推理机制和学习功能.     

面向蛋白质功能预测中有向无环图标记结构的多示例多标记学习

在多示例多标记学习问题中,标记之间往往是相互关联的,其中有向无环图结构是一种常见的层次关联结构,可见于蛋白质的基因本体学生物学功能预测的应用场景中。针对其标记间的有向无环图结构,提出了一种新的多示例多标记学习算法。算法从原始数据的特征空间训练出所有标记共享的低维子空间,通过随机梯度下降方法来降低模型排序损失,并融入标记间有向无环图结构关系对预测标记进行优化。将该算法应用于多个数据集的蛋白质功能预测中,实验结果表明,该算法具有更高的效率及预测性能。     

多约束强化学习最优智能滑翔制导方法

为提升复杂飞行任务下滑翔制导的自主性,提出一种基于最优制导与强化学习的多约束智能滑翔制导策略。引入三维最优制导以满足终端经纬度、高度以及速度倾角约束。提出基于侧向正弦机动的速度控制策略,研究考虑机动飞行的终端速度解析预测方法。针对速度控制中机动幅值无法离线确定的问题,研究基于强化学习的智能调参方法。该方法基于终端速度设计状态空间,以机动幅值设计动作空间,设计综合终端速度误差与滑翔制导任务的回报函数,采用Q-Learning实现机动幅值的智能调整。仿真结果表明,智能滑翔制导方法能够高精度满足终端多种约束,并能有效提升复杂任务下的自主决策能力。     

Ballistic response of armour plates using Generative Adversarial Networks

It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V₅₀ ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity (BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network (GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V₅₀ BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process.