基于博弈论的装备科研、购置、维修经费比例关系优化分析

通过不同时期国家战略部署、科研发展情况及经济承受能力对装备经费分配的影响分析,采用博弈的方法,建立了装备科研、购置和维修费之间的比例关系优化模型,给出了寻求纳什均衡点的迭代算法,并进行了仿真计算.仿真结果证明了该方法的可行性与正确性.     

Burning rate and other characteristics of strontium titanate (SrTiO3) supplemented AP/HTPB/Al composite propellants

In a quest of search for a new burning rate modifier for composite propellant, strontium titanate (SrTiO₃), a perovskite oxide has been chosen for evaluation in a composite propellant formulation based on its other catalytic applications. Initially, SrTiO₃ was characterized for particle size, morphology and material/phase identification (using XRD). By varying SrTiO₃ content in a standard composite propellant, different compositions were prepared and their performance and processing parameters like the end of mix (EOM) viscosity, mechanical properties, density, burning rate, pressure exponent (n-value), etc. were measured. The results reveal that 2% SrTiO₃ causes more than 12% enhancement in propellant burning rate (at 70 ksc pressure) in comparison to the standard propellant composition. The pressure exponent also increases to 0.46, whereas the standard composition was having its value as 0.35.     

靴形喷油速率耦合预喷射对超高压共轨柴油机性能的影响

在介绍超高压共轨系统工作原理的基础上,基于GT-Power软件建立单缸超高压共轨柴油机的仿真模型,并利用试验验证模型的准确性,而后通过模型分析不同喷油速率、靴形喷油速率耦合不同预喷油量和靴形喷油速率耦合不同预喷提前角对超高压共轨柴油机动力性、经济性以及燃烧排放特性的影响。结果表明:通过调整超高压共轨系统中电控增压器电磁阀和喷油器电磁阀的开启时间,能够实现喷油速率的柔性可调。随着喷油速率从矩形变化到靴形,柴油机缸内压力、温度以及NO_x排放量均逐渐降低,而soot排放量逐渐升高,且靴形喷油速率可使柴油机获得最大的功率(扭矩)和最低的油耗率。靴形喷油速率耦合较小的预喷油量可以使柴油机获得更好的动力性、经济性和燃烧特性,但同时也会导致NO_x排放量的升高。靴形喷油速率耦合较大的预喷提前角有助于改善柴油机排放特性,但受到预喷油量的限制,效果并不明显。     

Cell structure of microcellular combustible object foamed by supercritical carbon dioxide

In order to solve the issue that the combustible objects for cased telescoped ammunition (CTA) didn't burn completely during the combustion process, the microcellular combustible objects were foamed with numerous cells in the micron order to improve the combustion performance by the supercritical carbon dioxide (SCCO₂) foaming technology. As the cell structure determined the combustion properties of microcellular combustible objects, the solubility of SCCO₂ dissolved into the combustible objects was obtained from the gravimetric method, and scanning electron microscope (SEM) was applied to characterize the cell structure under various process conditions of solubility, foaming temperature and foaming time. SEM images indicate that the cell diameter of microcellular combustible objects is in the level of 1 μm and the cell density is about 10¹¹ cell⋅cm⁻³. The microcellular combustible objects fabricated by the SCCO₂ foaming technology are smooth and uniform, and the high specific surface area of cell structure can lead to the significant combustion performance of microcellular combustible object for CTA in the future.     

科研成果向教学转化的机制建设初探

科学研究成果在高校如雨后春笋般涌现。如何应用这些成果，发挥其实用价值，是摆在我们面前的一项重要任务。将科研与教学紧密结合，将科研成果应用到院校教学工作中，提高教学效益，提高人才培养质量，是当前院校的紧迫任务。要建立科学的评价指标体系，实现科研成果向教学转化的数字化评价，建立科研成果向教学转化的评价机制。     

基于Vague集的装备采购项目组织结构评价方法

在装备采购项目组织评价中引入Vague集理论，在列举现有项目组织结构类型的基础上，构建项目组织结构评价指标体系，建立各项目组织结构和理想组织结构的Vague集，计算各项目组织结构和理想组织结构的相似度量，完成对装备采购项目组织结构的评价，为装备采购项目组织设计奠定基础。     

改进的SIR宽阻带微带带通滤波器设计

利用一种改进SIR谐振器设计交叉耦合微带带通滤波器,实现对滤波器谐波响应的进一步抑制。在此谐振器内部引入SIR谐波抑制结构,并给出了宽阻带滤波器的仿真结果。该滤波器具有较宽的阻带特性,从f0到2.8f0间的抑制约为30 dB以上;从2.8f0到5.3f0间的抑制约为20 dB以上。这种简单的谐波抑制结构既不改变原有滤波器的结构,又不需要更高精度的制作工艺,具有较强的实用性。     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

Weak aging properties for coherent systems with statistically dependent component lifetimes

As a relevant topic in reliability theory, the preservation of aging properties under the formation of various coherent structures contributes to improving system performance through better structure design and more effective system maintenance. The classical research in this line usually focuses upon coherent systems with independent component lifetimes. Recently, some authors discussed the preservation of IFR, NBU, and DMRL in the setting of dependent component lifetimes. This paper further investigates sufficient conditions for coherent systems with dependent component lifetimes to preserve aging properties including NBUC, NBU (2), DMRL, and their dual versions. Some examples are presented to illustrate coherent structures and typical copula functions fulfilling the present sufficient conditions as well.     

Supply chain coordination with shelf‐space and retail price dependent demand and heterogeneous retailers

We consider supply chain coordination in which a manufacturer supplies some product to multiple heterogeneous retailers and wishes to coordinate the supply chain via wholesale price and holding cost subsidy. The retail price is either exogenous or endogenous. The market demand is described by the market share attraction model based on all retailers'shelf‐spaces and retail prices. We obtain optimal solutions for the centralized supply chain, where the optimal retail pricing is a modified version of the well‐known cost plus pricing strategy. We further get feasible contracts for the manufacturer to coordinate the hybrid and decentralized supply chains. The manufacturer can allocate the total profit free to himself and the retail market via the wholesale price when the retail price is exogenous, but otherwise he cannot. Finally, we point out that different characteristics of the retail market are due to different powers of the manufacturer, and the more power the manufacturer has, the simpler the contract to coordinate the chain will be. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010