悬浮式深弹的被动测距技术

通过测量线谱信号相位变化率来测量目标距离变化率,说明其原理并推导出相应的结果,根据对有关试验结果的分析表明,该方法简单易行,适合于浅水海域中悬浮式深弹测距使用,从而为深水炸弹反鱼雷提供了相关技术支持.     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

一种基于Lorentzian函数的变步长LMS自适应滤波算法

为了改善传统的LMS类算法存在的缺点,提高算法的收敛速度和跟踪性能,提出了一种基于Lorentzian函数的变步长LMS自适应滤波算法.该算法采用Lorentzian函数来建立估计误差e(n)和步长因子μ(n)之间的非线性关系,以达到提高收敛速度和改善跟踪性能的目的.计算机仿真表明,算法与其他LMS类自适应滤波算法相比,在收敛速度和跟踪性能上都有较大的提升.     

消防与保险互动机制研究

从分析消防和保险合作发展的历史、合作过程中存在的问题入手,探讨了新形势下消防与保险合作的机制,并从五个方面提出了消防和保险具体合作的方法和步骤,为今后消防和保险的合作提供了建设性的意见,也为消防工作今后的发展提供了新的思路。     

Monitoring poisson count data with probability control limits when sample sizes are time varying

This article considers the problem of monitoring Poisson count data when sample sizes are time varying without assuming a priori knowledge of sample sizes. Traditional control charts, whose control limits are often determined before the control charts are activated, are constructed based on perfect knowledge of sample sizes. In practice, however, future sample sizes are often unknown. Making an inappropriate assumption of the distribution function could lead to unexpected performance of the control charts, for example, excessive false alarms in the early runs of the control charts, which would in turn hurt an operator's confidence in valid alarms. To overcome this problem, we propose the use of probability control limits, which are determined based on the realization of sample sizes online. The conditional probability that the charting statistic exceeds the control limit at present given that there has not been a single alarm before can be guaranteed to meet a specified false alarm rate. Simulation studies show that our proposed control chart is able to deliver satisfactory run length performance for any time‐varying sample sizes. The idea presented in this article can be applied to any effective control charts such as the exponentially weighted moving average or cumulative sum chart. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 625–636, 2013     

面向架次率的机场资源配置优化模型

架次出动率是评价军用飞机作战能力的一项重要指标.面向架次率这一重要指标,基于排队理论和边际分析法建立了机场资源配置优化模型.首先建立架次生成过程的闭排队网络模型,使用平均值分析方法获得给定资源配置下,任意架飞机参与飞行时的架次出动率;然后结合平均值分析算法和边际分析方法,综合考虑资源的价值和对架次率的影响,建立面向架次率的资源配置优化模型.此模型可为机场资源配置提供决策方案,并通过一个实例介绍了本模型的应用.     

多晶硅制绒中影响金字塔结构因素的研究

通过分析不同碱性溶液及添加不同活性剂制备出的具有不同金字塔结构的绒面,探讨了影响金字塔成核的因素。采用扫描电镜和紫外一可见分光光度计对绒面的金字塔结构和反射特性进行了分析,结果表明,腐蚀速率与金字塔尺寸成正比,金字塔结构影响绒面减反特性。对造成金字塔结构差异的原因和金字塔成核过程进行了分析。     

受符号调制的m序列旁瓣特性研究

m序列因其优良的二值自相关特性而广泛应用于雷达和通信系统中。存在符号调制时 ,m序列匹配接收的旁瓣特性不再具有二值性。研究表明 :对于生成多项式相同的m序列 ,当移位寄存器的初始状态不同时 ,其符号调制下的旁瓣特性存在明显差异。选择合适的初始状态 ,可以得到较高的主旁瓣比。采用旁瓣抑制滤波器可以进一步显著提升主旁瓣比     

求解武器目标分配问题的改进粒子群算法

在建立多种类型武器目标分配模型的基础上,提出了一种求解该模型的改进粒子群算法。首先,定义粒子聚焦距离变化率,使惯性权重依据聚焦距离变化率自适应调整;其次,采用速度最大值线性递减的策略平衡算法收敛精度与全局寻优能力之间的矛盾;最后,粒子替换策略使算法改善了因自适应惯性权重的引入而造成收敛速度变慢的问题。仿真结果表明,提出模型和算法合理有效,算法收敛快,适合求解各种种群规模的武器目标分配问题。     

交流杂散电流对埋地钢质管道腐蚀危害实验

为探究交流杂散电流的影响因素及其对阴极保护系统的影响,搭建交流干扰腐蚀实验平台研究了土壤电阻率、干扰电压大小、涂层电阻率和通断时间比对交流杂散电流密度的影响;采用腐蚀试片失重法研究了交流杂散电流密度对腐蚀速率的影响以及阴极保护电位分别为-850 mV和-1 000 mV时对阴极保护系统的影响。实验结果表明:土壤电阻率、干扰电压大小、涂层电阻率和通断时间比对交流杂散电流密度具有较为显著的影响;阴极保护电位为-1 000 mV时,即使交流电流密度为20 mA/cm2,腐蚀试片也能得到有效保护。因此,埋地管道应采用绝缘性能好的防腐涂层,规划合理的铺设路线,并在运行过程中采取强制电流阴极保护系统,设置合理的阴极保护电位。