A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

A numerical study on the disturbance of explosive reactive armors to jet penetration

The disturbance of flat and V-shaped sandwich reactive armor configurations to shaped-charge jet is studied by a numerical approach. The disturbing and cutting effects of the two reactive armor configurations to the jet are successfully captured. The predicted disturbance characteristics and patterns are in fairly good agreement with the X-ray photographic observations. The residual depth of penetration into a semi-infinitive homogeneous steel target behind the reactive armor is computed for a series of jet/armor parameters. For the flat configuration, it is demonstrated that the residual penetration depth is not significantly reduced for a normal impact while it is reduced up to 75% for an oblique impact. In comparison, the V-shaped configuration reduces the penetration depth of the jet to 90%, and it is observed that the penetration depth is not sensitive to the V-shaped angle.     

Damage analysis of POZD coated square reinforced concrete slab under contact blast

High efficiency, environmental protection and sustainability have become the main theme of the development of the protection engineering, requiring that the components not only meet the basic functions, but also have chemical properties such as acid and alkali corrosion resistance and aging resistance. Polyisocyanate-oxazodone (POZD) polymer has the above characteristics, it also has the advantages of strong toughness, high strength and high elongation. The concrete slab sprayed with POZD material has excellent anti-blast performance. In order to explore the damage characteristics of POZD sprayed concrete slabs under the action of contact explosion thoroughly, the contact explosion test of POZD concrete slabs with different charges were carried out. On the basis of experimental verification, numerical simulation were used to study the influence of the thickness of the POZD on the blast resistance of the concrete slab. According to the test and numerical simulation results that as the thickness of the coating increases, the anti-blast performance of the concrete slab gradually increases, and the TNT equivalent required for critical failure is larger. Based on the above analysis, empirical expressions on normalized crater diameter, the normalized spall diameter and normalized spall diameter are obtained.     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Experimental and numerical study of the blast wave decrease using sandwich panel by granular materials core

Among the intrinsic properties of some materials, e.g., foams, porous materials, and granular materials, are their ability to mitigate shock waves. This paper investigated shock wave mitigation by a sandwich panel with a granular core. Numerical simulations and experimental tests were performed using Autodyn hydro-code software and a shock tube, respectively. The smoothed particle hydrodynamics (SPH) method was used to model granular materials. Sawdust and pumice, whose properties were determined by several compression tests, were used as granular materials in the sandwich panel core. These granular materials possess many mechanisms, including compacting (e.g., sawdust) and crushing (e.g., pumice) that mitigate shock/blast wave. The results indicated the ineffectiveness of using a core with low thickness, yet it was demonstrated to be effective with high thickness. Low-thickness pumice yielded better results for wave mitigation. The use of these materials with a core with appropriate core reduces up to 88% of the shock wave. The results of the experiments and numerical simulations were compared, suggesting a good agreement between the two. This indicates the accuracy of simulation and the ability of the SPH method to modeling granular material under shock loading. The effects of grain size and the coefficient of friction between grains have also been investigated using simulation, implying that increasing the grain size and coefficient of friction between grains both reduce overpressure.     

FE modeling of concrete beams and columns reinforced with FRP composites

Compression and flexure members such as columns and beams are critical in a structure as its failure could lead to the collapse of the structure. In the present work, numerical analysis of square and circle short columns, and reinforced concrete (RC) beams reinforced withfiber reinforced polymer composites are carried out. This work is divided into two parts. In thefirst part, numerical study of axial behavior of square and circular concrete columns reinforced with Glass Fiber Reinforced Polymer (GFRP) and Basalt Fiber Reinforced Polymer (BFRP)bars and spiral, and Carbon Fiber Reinforced Polymer (CFRP) wraps is conducted. The results of the first part showed that the axial capacity of the circular RC columns rein-forced with GFRP increases with the increase of the longitudinal reinforcement ratio. In addition, the results of the numerical analysis showed good correlation with the experimental ones. An interaction diagram for BFRP RC columns is also developed with considering various eccentricities. The results of numerical modeling of RC columns strengthened with CFRP wraps revealed that the number and the spacing between the CFRP wraps provide different levels of ductility enhancement to the column. For the cases considered in this study, column with two middle closely spaced CFRP wraps demonstrated the best performance. In the second part of this research,flexural behavior of RC beams reinforced with BFRP, GFRP and CFRP bars is investigated along with validation of the numerical model with the experimental tests. The results resembled the experimental observations that indicate significant effect of the FRP bar diameter and type ont he flexural capacity of the RC beams. It was also shown that Increasing the number of bars while keeping the same reinforcement ratio enhanced the stiffness of the RC beam.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.