一种应用于移动机器人的路径跟踪控制方法

针对移动机器人的路径跟踪复杂性问题,设计了一种易于实现的控制系统,其中的跟踪策略改进了传统的视线导航算法,使机器人光滑趋近到期望路径,控制器的设计采用基于模糊逻辑的变速度控制和角速度滑模控制,减小了角速度的抖振,并使控制具有一定的智能化特点.实验结果表明,设计的控制系统即可以保证路径跟踪的精度,同时避免了运动控制的不稳定性.     

反舰导弹纯方位发射捕捉概率计算方法

反舰导弹的纯方位发射对目标信息要求不高,在目标信息的探测越来越艰难的今天,是反舰导弹较为重要的一种发射方式,也将会成为未来海战场上常用的作战方式.介绍了反舰导弹捕捉概率的计算方法和传统纯方位发射的捕捉概率的计算方法,并从分析反舰导弹捕捉概率的计算模型和影响因素出发,指出传统的反舰导弹纯方位发射的捕捉概率计算模型存在不足,并给出了修正后的计算模型.     

An attacker‐defender model for analyzing the vulnerability of initial attack in wildfire suppression

Wildfire managers use initial attack (IA) to control wildfires before they grow large and become difficult to suppress. Although the majority of wildfire incidents are contained by IA, the small percentage of fires that escape IA causes most of the damage. Therefore, planning a successful IA is very important. In this article, we study the vulnerability of IA in wildfire suppression using an attacker‐defender Stackelberg model. The attacker's objective is to coordinate the simultaneous ignition of fires at various points in a landscape to maximize the number of fires that cannot be contained by IA. The defender's objective is to optimally dispatch suppression resources from multiple fire stations located across the landscape to minimize the number of wildfires not contained by IA. We use a decomposition algorithm to solve the model and apply the model on a test case landscape. We also investigate the impact of delay in the response, the fire growth rate, the amount of suppression resources, and the locations of fire stations on the success of IA.     

柔软物体力触觉形变模型验证系统

为了验证柔性物体力-形变模型的合理性,构建了基于CC2531芯片的无线数据收发平台、力传感器测量平台和FALCON手控器位移测量平台的力-形变模型验证系统。以新鲜猪肝脏为实验对象,研究了弹性形变实验和穿刺实验的作用力与位移之间的关系;以力-形变测量数据为基础,进行了参数验证校调。仿真实验结果表明:模型中力-形变特性与实际测量值保持一致。该系统能广泛应用于柔性物体力-形变模型验证,对于促进力触觉虚拟医学仿真系统的发展具有重要意义。     

船舶静态电场跟踪的渐进更新扩展卡尔曼滤波器

为了实现利用船舶静态电场对船舶进行跟踪的目的,针对传统卡尔曼滤波算法中存在的问题,设计一种新的非线性滤波器。建立船舶的状态空间模型,分析传统卡尔曼滤波算法在船舶跟踪中存在的问题;依据渐进贝叶斯思想,利用连续白噪声与离散白噪声序列噪声协方差之间的关系,设计一种新的渐进更新扩展卡尔曼滤波器。仿真结果表明,该滤波器能有效地抑制由于初始误差较大而造成的滤波性能下降和滤波发散,能够有效地跟踪船舶,具有较高的实用价值。     

Optimal switchover times between two activities utilizing the same resource

The “gold‐mining” decision problem is concerned with the efficient utilization of a delicate mining equipment working in a number of different mines. Richard Bellman was the first to consider this type of a problem. The solution found by Bellman for the finite‐horizon, continuous‐time version of the problem with two mines is not overly realistic since he assumed that fractional parts of the same mining equipment could be used in different mines and this fraction could change instantaneously. In this paper, we provide some extensions to this model in order to produce more operational and realistic solutions. Our first model is concerned with developing an operational policy where the equipment may be switched from one mine to the other at most once during a finite horizon. In the next extension we incorporate a cost component in the objective function and assume that the horizon length is not fixed but it is the second decision variable. Structural properties of the optimal solutions are obtained using nonlinear programming. Each model and its solution is illustrated with a numerical example. The models developed here may have potential applications in other areas including production of items requiring the same machine or choosing a sequence of activities requiring the same resource. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 186–203, 2002; DOI 10.1002/nav.10008     

论消防工作与政府投入的数学原理

近年来,政府对消防投入水平较低。通过建立数学模型,从消防部门与政府的相互关系进行理论论证,抛砖引玉,提出消防工作的建议。     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

动态飞行仿真中人体六自由度模型研究

应用多体系动力学方法,结合飞行力学,给出了动态飞行仿真中飞行员的六自由度数学模型,并将其应用在动态飞行仿真建模中,分析结果表明这种数学模型是可行的。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.