班主任应具备的基本素质和工作方法

班主任工作的好坏,直接影响着学校整体学生管理工作。提高班主任素质,不断探索班主任工作的新途径、新方法,才能实现班主任工作的新突破,开创班主任工作的新局面。     

短脉冲激光作用下爆发沸腾的温度及汽泡行为研究

采用短脉冲激光加热浸没在丙酮液池的铂薄膜电阻的方法,以及高压电火花单次放电高速照相技术,在国内首次建立了超急速爆发实验台,达到了微秒级的温度频响和2×106帧/s的高速照相.研究发现,随着激光热流密度增加,试件表面温度快速升高到一饱和值,与过热液体的动力学理论极限温度非常接近.拍摄到了与常规沸腾很不相同的蘑菇云式爆发沸腾照片.试件表面及临近表面的微薄液层内瞬间爆发生成大量大小相当的细小汽泡,汽泡脱离直径远低于经典Fritz公式计算值,上浮速度先快后慢.     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题，设计了损伤模拟的基本方案；采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型；通过模型试验，获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

悬浮式深弹反鱼雷武器系统的有效拦截域分析

针对悬浮式深弹反鱼雷武器系统在作战使用中需对目标的可拦性进行快速判断的需求,提出了系统有效拦截域的概念,又根据系统作战流程和工作原理,将有效拦截域判断条件细化为时间域和空间域两个方面判据,进而构建了基于实战中可获取的战场态势等相关信息计算系统有效拦截域的数学模型,并具体给出了一个计算实例。研究结果可为其作战使用提供一定参考。     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

弹丸爆炸仿真与破片质量统计软件开发

针对利用试验研究弹丸爆炸过程难度大的问题,采用ANSYS／LS-DYNA有限元软件对弹丸爆炸过程进行了仿真,设计开发了破片质量分布统计软件,再现了弹丸爆炸的宏观过程,并且得到了破片质量分布的定量结果．     

多爆炸成型弹丸性能参数灰关联分析

为了获得各参数对多爆炸成型弹丸毁伤性能的影响程度,以EFP速度和MEFP发散角为参考序列,以药型罩和装药参数为比较序列,运用灰关联理论对影响MEFP毁伤性能的参数进行了灰关联分析。在此基础上,应用灰关联分析结果完成了MEFP战斗部优化设计。结果表明:在较少样本空间前提下,采用灰关联理论可以分析获得影响多爆炸成型弹丸毁伤性能的各因素主次关系,而且经过优化后的MEFP战斗部,大大地提高了EFP的集聚性和毁伤性能。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Field test and probabilistic analysis of irregular steel debris casualty risks from a person-borne improvised explosive device

Person-borne improvised explosive devices (PBIEDs) are often used in terrorist attacks in Western countries. This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard. An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour, including positions, velocity, and trajectory angles. These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis. In the probabilistic analyses a probability of fatality or serious injury was computed. Based on the results presented, many practical conclusions can be drawn, for instance, regarding safe evacuation distances if a person were exposed to a suspected PBIED.