压制火控系统中有关最大射程角的应用探讨

通过对实际应用中,压制火控系统射击诸元中有关最大射程角的具体使用进行了分析,提出了在地面压制武器系统外弹道中距离-射角函数可能出现多个极点的观点,并给出了最大射程角具体计算方法,在火控系统的工程实践中提高了武器系统的性能。     

基于激励机制的装备采办风险总量控制

针对装备采办中的风险总量控制,提出一种激励方式来提高承包商的积极性。在单目标风险控制模型的基础上,建立了多目标风险控制模型,推导出了激励机制下风险控制的最优合同公式。对激励机制中存在的两类错误进行了理论分析和实例验证,得出了两类错误对收益的影响,并在成本控制中得到了应用,有效地提高了装备采办的质量和效率,为军方决策者在装备采办中提供了合理的参考依据。     

动态滑翔运动建模、机理分析与航迹优化

信天翁凭借动态滑翔的飞行技巧从梯度风中获取能量,从而在几乎不拍翅膀的情况下进行长时间、长距离飞行,这种技巧应用于小型无人机上可拓展其完成任务的能力。基于飞行器动力学对梯度风场中的无人机运动方程进行推导和简化处理;利用简化的运动方程,分别从非惯性参考系中的动能定理和机械能变化的角度,对动态滑翔获取能量的机理进行分析;利用微分平坦法,以最小平均控制输入变化率为目标函数,对徘徊模式和平移模式的动态滑翔航迹进行优化计算。分析结果表明:逆风爬升、顺风下滑是动态滑翔基本获能方式。优化结果表明:控制输入变得更加平滑,甚至出现阶段性的常值,使得控制更加简化;徘徊模式下,当风梯度作为决策变量时,优化过程可在[0,0.5 s-1]的区间上找到使得目标函数值最小的风梯度;平移模式下,目标函数值在该区间上单调递减。     

某加油车液压系统的温升控制

温升控制是液压系统设计的重要内容，其效果好坏直接影响着液压系统工作的可靠性。针对某加油车液压系统连续工作时间长、结构紧凑等特点，设计了一种新型的“油冷蛇形管”式液压油温控制系统，即将加油车自身输转的柴油导入液压油箱内的冷却管，对液压油实施强制冷却。经试验验证，取得了良好的温控效果。该方法取消了冷却水源，简化了结构，并达到了控制油温的目的，对类似系统的设计具有较好的借鉴意义。     

基于ARM的LED指挥控制终端的设计与实现

LED显示屏是现代社会发布信息的一种重要方式,通过LED显示屏可以播放视频、文字等不同形式的信息,为人们传达最直观的视觉信息。随着科学技术的不断发展,LED显示屏的应用也日渐广泛,尤其是军事上的应用,比如基于LED显示屏的各种级别指挥控制终端的设计和运用,具有更为深入的研究价值。而ARM处理器是实现LED显示屏控制系统有效运行的基础,主要针对基于ARM的LED显示屏指挥控制终端系统的设计与实现的相关问题进行了探讨。     

云模型改进惯性权重的混沌交替粒子群算法

标准粒子群算法通过线性减小惯性权重系数来调整寻优性能,但缺乏智能化机制易导致算法后期产生早熟或陷入局部最优而产生僵局。针对这一问题,提出一种基于云模型改进惯性权重的混沌交替粒子群优化算法。根据粒子迭代变化关系,采用云模型理论对惯性权重ω进行智能化调整,以平衡其全局和局部搜索能力,防止算法产生局部僵局;另外,判定粒子稳定性,对于可能陷入局部僵局的稳定粒子进行混沌扰动,促使其跳出僵局进而向最优位置更新。实验与分析表明,基于云模型改进惯性权重的混沌交替粒子群优化算法能够跳出局部僵局且具有较高的寻优精度,算法接近完全收敛时的平均迭代次数,较现有相关研究分别降低了13.73%~20.11%。     

基于模型跟踪变结构控制的飞行重构控制律设计

提出一种基于模型跟踪变结构控制的飞行重构控制律的设计方法.利用该方法能实现受控对象对理想模型较高精度的跟踪,使重构飞行控制系统具有较好的控制性能.首先设计了一个比例-积分滑模面以确保消除稳态误差,采用极点配置技术使滑模具有良好的动态品质,其次利用饱和控制技术来减少变结构控制引起的抖振现象,最后以某型飞机纵向飞行控制系统为例进行了相应的数字仿真.结果表明重构系统不仅实现了无抖振模型跟踪,而且还具有较强的鲁棒性.     

Optimal outbound dispatch policies: Modeling inventory and cargo capacity

In this paper, we present an optimization model for coordinating inventory and transportation decisions at an outbound distribution warehouse that serves a group of customers located in a given market area. For the practical problems which motivated this paper, the warehouse is operated by a third party logistics provider. However, the models developed here may be applicable in a more general context where outbound distribution is managed by another supply chain member, e.g., a manufacturer. We consider the case where the aggregate demand of the market area is constant and known per period (e.g., per day). Under an immediate delivery policy, an outbound shipment is released each time a demand is realized (e.g., on a daily basis). On the other hand, if these shipments are consolidated over time, then larger (hence more economical) outbound freight quantities can be dispatched. In this case, the physical inventory requirements at the third party warehouse (TPW) are determined by the consolidated freight quantities. Thus, stock replenishment and outbound shipment release policies should be coordinated. By optimizing inventory and freight consolidation decisions simultaneously, we compute the parameters of an integrated inventory/outbound transportation policy. These parameters determine: (i) how often to dispatch a truck so that transportation scale economies are realized and timely delivery requirements are met, and (ii) how often, and in what quantities, the stock should be replenished at the TPW. We prove that the optimal shipment release timing policy is nonstationary, and we present algorithms for computing the policy parameters for both the uncapacitated and finite cargo capacity problems. The model presented in this study is considerably different from the existing inventory/transportation models in the literature. The classical inventory literature assumes that demands should be satisfied as they arrive so that outbound shipment costs are sunk costs, or else these costs are covered by the customer. Hence, the classical literature does not model outbound transportation costs. However, if a freight consolidation policy is in place then the outbound transportation costs can no longer be ignored in optimization. Relying on this observation, this paper models outbound transportation costs, freight consolidation decisions, and cargo capacity constraints explicitly. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 531–556, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10030     

离子液体[SO3H-Bmim][HSO4]催化餐饮废油制备生物柴油

实验合成了一种磺酸基功能化离子液体,并用于催化高酸值餐饮废油制备生物柴油。当醇油物质的量之比为8∶1,离子液体用量为废油质量的0.8%,反应温度为150℃,反应时间为180min,生物柴油的产率可达到90.6%。该离子液体可以在比较温和的条件下将餐饮废油的酸值从13.22mgKOH/g降低到1mgKOH/g以下,然后利用NaOH催化生产生物柴油,会达到更高的产率,更为经济可行。