Transportation problems with some xij negative and transshipment problems

The general solution process of the Hitchcock transportation problem resulting from the application of the method of reduced matrices may give solutions with some negative x_ij values. This paper is devoted to a review of the reduced matrices method, an examination of suitable interpretation of sets of x_ij which include some negative values, and ways of interpreting these values in useful modifications of the Hitchcock problem. Such modifications include a) the reshipment problem, b) the overshipment problem, and c) the transshipment problem. Techniques are developed for determining and eliminating c_ij which are not optimal. These techniques and results are useful in solving the problems indicated above. The natural applicability of the simple and general method of reduced matrices is emphasized.     

The fixed charge problem

A fundamental unsolved problem in the programming area is one in which various activities have fixed charges (e.g., set-up time charges) if operating at a positive level. Properties of a general solution to this type problem are discussed in this paper. Under special circumstances it is shown that a fixed charge problem can be reduced to an ordinary linear programming problem.     

An integer decomposition algorithm for solving a two‐stage facility location problem with second‐stage activation costs

We study a stochastic scenario‐based facility location problem arising in situations when facilities must first be located, then activated in a particular scenario before they can be used to satisfy scenario demands. Unlike typical facility location problems, fixed charges arise in the initial location of the facilities, and then in the activation of located facilities. The first‐stage variables in our problem are the traditional binary facility‐location variables, whereas the second‐stage variables involve a mix of binary facility‐activation variables and continuous flow variables. Benders decomposition is not applicable for these problems due to the presence of the second‐stage integer activation variables. Instead, we derive cutting planes tailored to the problem under investigation from recourse solution data. These cutting planes are derived by solving a series of specialized shortest path problems based on a modified residual graph from the recourse solution, and are tighter than the general cuts established by Laporte and Louveaux for two‐stage binary programming problems. We demonstrate the computational efficacy of our approach on a variety of randomly generated test problems. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The fixed charge problem

The fixed charge problem is a nonlinear programming problem of practical interest in business and industry. Yet, until now no computationally feasible exact method of solution for large problems had been developed. In this paper an exact algorithm is presented which is computationally feasible for large problems. The algorithm is based upon a branch and bound approach, with the additional feature that the amount of computer storage required remains constant throughout (for a problem of any given size). Also presented are three suboptimal heuristic algorithms which are of interest because, although they do not guarantee that the true optimal solution will be found, they usually yield very good solutions and are extremely rapid techniques. Computational results are described for several of the heuristic methods and for the branch and bound algorithm.     

A general treatment of upper unbounded and bounded hitchcock problems

This paper is designed to treat (a) the problem of the determination of the absolute minimum cost, with the associated assignments, when there is no limit, N, on the number of parcels available for shipment in a modified Hitchcock problem. This is accomplished with the use of a transformed cost matrix. C*, to which the so-called transportation paradox does not apply. The general Hitchcock solution using C* gives the cost T*, which is the absolute minimum cost of the original problem, as well as sets of assignments which are readily transformed to give the general assignments of the original problem. The sum of these latter assignments gives the value of N_u, the unbounded N for minimum cost. In addition, this paper is designed to show (b) how the method of reduced matrices may be used, (c) how a particular Hitchcock solution can be used to determine a general solution so that one solution using C* can provide the general answer, (d) how the results may be modified to apply to problems with fixed N, and hence (e) to determine the function of the decreasing T as N approaches N_u, and finally (f) to provide a treatment when the supplies at origin i and/or the demands at destination j, are bounded.     

A partitioning technique for obtaining solutions to the modularization problem

A significant problem in electronic system design is that of partitioning the functional elements of an equipment schematic into subsets which may be regarded as modules. The collection of all such subsets generated by a particular partitioning forms a potential modular design. The specific problem is to determine that partitioning of the schematic that minimizes a cost function defined on the subsets subject to specified hardware, design, packaging, and inventory constraints. This problem is termed the modularization problem. This paper presents a method for obtaining restricted solutions to the modularization problem by employing some recent developments in linear graph theory obtained by one of the coauthors. Numerical results from the solution of several typical problems are presented.     

An approximate solution method for the fixed charge problem

In the absence, to date, of an exact method for solving the linear programming problem with fixed charges, two heuristic methods have been proposed and extensively investigated, computationally, for moderate sized problems. The results indicate that the heuristic methods produce optimal solutions in well over 90 percent of the several hundred problems investigated and very close to optimal (a few percent) in the remaining cases. Hence it should be of practical significance to practitioners in the field.     

Optimal policies under the shortage probability criterion for an inventory model with unknown dependent demands

The principal innovation in this paper is the consideration of a new objective function for inventory models which we call the shortage probability criterion. Under this criterion we seek to minimize the total expected discounted cost of ordering subject to the probability that the stock level at the end of the period being less than some fixed quantity not exceed some prescribed number. For three different models we show that the minimum order policy is optimal. This result is then applied to a particular inventory model in which the demand distribution is not completely known. A Bayesian procedure is discussed for obtaining optimal policies.     

An easy solution for a special class of fixed charge problems

The fixed charge problem is a mixed integer mathematical programming problem which has proved difficult to solve in the past. In this paper we look at a special case of that problem and show that this case can be solved by formulating it as a set-covering problem. We then use a branch-and-bound integer programming code to solve test fixed charge problems using the setcovering formulation. Even without a special purpose set-covering algorithm, the results from this solution procedure are dramatically better than those obtained using other solution procedures.     

An algorithm for the solution of a location problem with metric constraints

In many location problems, the solution is constrained to lie within a closed set. In this paper, optimal solutions to a special type of constrained location problem are characterized. In particular, the location problem with the solution constrained to be within a maximum distance of each demand point is considered, and an algorithm for its solution is developed and discussed.     

An approximative algorithm for the fixed charge problem

This paper describes an approximate solution method for solving the fixed charge problem. This heuristic approach is applied to a set of test problems to explore the margin of error. The results indicate that the proposed fixed charge simplex algorithm is capable of finding optimal or near optimal solutions to moderate sized fixed charge problems. In the absence of an exact method, this heuristic should prove useful in solving this fundamental nonlinear programming problem.     

Sequencing many jobs on a multi-purpose facility

Suppose a given set of jobs has to be processed on a multi-purpose facility which has various settings or states. There is a choice of states in which to process a job and the cost of processing depends on the state. In addition, there is also a sequence-dependent changeover cost between states. The problem is then to schedule the jobs, and pick an optimum setting for each job, so as to minimize the overall operating costs. A dynamic programming model is developed for obtaining an optimal solution to the problem. The model is then extended using the method of successive approximations with a view to handling large-dimensioned problems. This extension yields good (but not necessarily optimal) solutions at a significant computational saving over the direct dynamic programming approach.     

Statistical decision analysis of stochastic linear programming problems

This paper presents a statistical decision analysis of a one-stage linear programming problem with deterministic constraints and stochastic criterion function. Procedures for obtaining numerical results are given which are applicable to any problem having this general form. We begin by stating the statistical decision problems to be considered, and then discuss the expected value of perfect information and the expected value of sample information. In obtaining these quantities, use is made of the distribution of the optimal value of the linear programming problem with stochastic criterion function, and so we discuss Monte Carlo and numerical integration procedures for estimating the mean of this distribution. The case in which the random criterion vector has a multivariate Normal distribution is discussed separately, and more detailed methods are offered. We discuss dual problems, including some relationships of this work with other work in probabilistic linear programming. An example is given in Appendix A showing application of the methods to a sample problem. In Appendix B we consider the accuracy of a procedure for approximating the expected value of information.     

Flow shop scheduling with earliness,tardiness, and intermediate inventory holding costs

We consider the problem of scheduling customer orders in a flow shop with the objective of minimizing the sum of tardiness, earliness (finished goods inventory holding), and intermediate (work‐in‐process) inventory holding costs. We formulate this problem as an integer program, and based on approximate solutions to two different, but closely related, Dantzig‐Wolfe reformulations, we develop heuristics to minimize the total cost. We exploit the duality between Dantzig‐Wolfe reformulation and Lagrangian relaxation to enhance our heuristics. This combined approach enables us to develop two different lower bounds on the optimal integer solution, together with intuitive approaches for obtaining near‐optimal feasible integer solutions. To the best of our knowledge, this is the first paper that applies column generation to a scheduling problem with different types of strongly ????‐hard pricing problems which are solved heuristically. The computational study demonstrates that our algorithms have a significant speed advantage over alternate methods, yield good lower bounds, and generate near‐optimal feasible integer solutions for problem instances with many machines and a realistically large number of jobs. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

An integer programming algorithm for portfolio selection with fixed charges

A mean-variance portfolio selection model with limited diversification is formulated in which transaction and management costs are incorporated as the sum of a linear cost and a fixed cost. The problem is a fixed charge integer programming problem solved by hypersurface search using dynamic programming. Fathoming is performed in the forward pass of dynamic programming so that values of the state variable which correspond to infeasible solutions are eliminated from the tables. This logic permits the solution of problems with 20–30 possible investments.     

Bicriteria product design optimization: An efficient solution procedure using AND/OR trees

Competitive imperatives are causing manufacturing firms to consider multiple criteria when designing products. However, current methods to deal with multiple criteria in product design are ad hoc in nature. In this paper we present a systematic procedure to efficiently solve bicriteria product design optimization problems. We first present a modeling framework, the AND/OR tree, which permits a simplified representation of product design optimization problems. We then show how product design optimization problems on AND/OR trees can be framed as network design problems on a special graph—a directed series‐parallel graph. We develop an enumerative solution algorithm for the bicriteria problem that requires as a subroutine the solution of the parametric shortest path problem. Although this parametric problem is hard on general graphs, we show that it is polynomially solvable on the series‐parallel graph. As a result we develop an efficient solution algorithm for the product design optimization problem that does not require the use of complex and expensive linear/integer programming solvers. As a byproduct of the solution algorithm, sensitivity analysis for product design optimization is also efficiently performed under this framework. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 574–592, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10031     

A heuristic routine for solving large loading problems

The loading problem involves the optimal allocation of n objects, each having a specified weight and value, to m boxes, each of specified capacity. While special cases of these problems can be solved with relative ease, the general problem having variable item weights and box sizes can become very difficult to solve. This paper presents a heuristic procedure for solving large loading problems of the more general type. The procedure uses a surrogate procedure for reducing the original problem to a simpler knapsack problem, the solution of which is then employed in searching for feasible solutions to the original problem. The procedure is easy to apply, and is capable of identifying optimal solutions if they are found.     

多目标决策的特殊坐标系求解方法

在多目标决策问题中,满意解常常要在非劣解中寻找。一般来讲,对于两个目标(二维)的解的判别并不困难,但遇到多个目标(n维),且有多个可行解时,对非劣解的判别就显得有些繁复了。因此,采用直观容易的特殊坐标系来判别"非劣解",从而给出求解多目标决策问题满意解的方法。     

Algorithms for the multi‐item multi‐vehicles dynamic lot sizing problem

We consider a two‐stage supply chain, in which multi‐items are shipped from a manufacturing facility or a central warehouse to a downstream retailer that faces deterministic external demand for each of the items over a finite planning horizon. The items are shipped through identical capacitated vehicles, each incurring a fixed cost per trip. In addition, there exist item‐dependent variable shipping costs and inventory holding costs at the retailer for items stored at the end of the period; these costs are constant over time. The sum of all costs must be minimized while satisfying the external demand without backlogging. In this paper we develop a search algorithm to solve the problem optimally. Our search algorithm, although exponential in the worst case, is very efficient empirically due to new properties of the optimal solution that we found, which allow us to restrict the number of solutions examined. Second, we perform a computational study that compares the empirical running time of our search methods to other available exact solution methods to the problem. Finally, we characterize the conditions under which each of the solution methods is likely to be faster than the others and suggest efficient heuristic solutions that we recommend using when the problem is large in all dimensions. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

The pure fixed charge transportation problem

The pure fixed charge transportation problem (PFCTP) is a variation of the fixed charge transportation problem (FCTP) in which there are only fixed costs to be incurred when a route is opened. We present in this paper a direct search procedure using the LIFO decision rule for branching. This procedure is enhanced by the use of 0–1 knapsack problems which determine bounds on partial solutions. Computational results are presented and discussed.