纳米金刚石磨料磁流变抛光材料去除机理与工艺研究

理论分析与实验验证表明,纳米金刚石磨料磁流变抛光材料去除机理是塑性剪切去除.在KDMRF-1000F磁流变抛光机床上进行工艺实验,研究抛光轮与工件表面的间隙、抛光轮转速、磁场强度对峰值去除效率和表面粗糙度的影响.工艺实验表明,去除函数具有良好的稳定性和重复性,2.5h以内峰值去除效率稳定在±0.3%以内,体积去除效率稳定在±0.5%以内.直径202mm(有效口径95%)的HIP SiC平面镜采用子孔径拼接测量方法,经过磁流变粗抛(30h)和精抛(9h)后,面形误差PV值0.13μm,RMS值0.012μm,表面粗糙度RMS值2.439nm.     

离子束抛光加工矩形离轴非球面镜

采用一种简单的方法使用线性三轴离子束系统实现了矩形离轴非球面镜的抛光加工.根据离子束材料去除机理,分析了去除函数的法向材料去除特性,并且以去除函数束径、峰值去除速率和体积去除速率为指标,评价了入射角的小扰动鲁棒性.利用相关的分析和实验结果,对矩形离轴镜的抛光加工进行了合理的简化,并在自行研制的离子束抛光机床上进行了修形...     

计算机控制小工具抛光技术中磨盘材料对去除函数的影响

研究了计算机控制小工具抛光(CCOP)加工中三种常用的磨盘材料对去除函数特性的影响,进一步完善材料去除模型,用以指导光学零件的加工。利用自行研制的AOCMT光学加工机床及接触式测量系统进行实验和分析。从去除函数形状、去除效率及稳定性、表面形貌三个方面进行了研究。实验结果表明:聚氨酯材料适用于粗抛光阶段;阻尼布材料适用于精抛光阶段;沥青材料适用于最后的修形加工和表面处理。     

光学材料抛光亚表面损伤检测及材料去除机理

抛光后光学元件仍然存在亚表面损伤,它降低光学元件的抗激光损伤能力和光学性能,为去除抛光亚表面损伤以提升光学元件使用性能,需要对其进行准确检测和表征.首先,采用恒定化学蚀刻速率法和二次离子质谱法分别检测水解层深度和抛光杂质的嵌入深度.然后,使用原子力显微镜检测亚表面塑性划痕的几何尺寸.通过分析表面粗糙度沿深度的演变规律,研究浅表面流动层、水解层和亚表面塑性划痕间的依存关系.最后,建立抛光亚表面损伤模型,并在此基础上探讨抛光材料去除机理.研究表明:水解层内包括浅表面流动层、塑性划痕和抛光过程嵌入的抛光杂质;石英玻璃水解层深度介于76和105nm之间;抛光过程是水解反应、机械去除和塑性流动共同作用的结果.     

基于去除函数预测模型的磁流变抛光工艺优化研究

在分析磁流变抛光加工过程的基础上,建立了磁流变抛光的去除函数预测模型,该模型利用加工前后的面形误差分布和仿真计算的面形残差分布,针对不同材料间的去除函数模型效率系数进行辨识,能够实现去除函数模型的准确预测.以该模型为基础,通过在传统磁流变抛光工艺中加入去除函数效率系数实时辨识的工艺环节,可以对磁流变抛光的加工工艺进行优化.利用该优化工艺对一块口径202mm的HIP SiC进行9次循环迭代加工,采用子孔径拼接测量技术进行测量,面形误差由初始的PV 0.72μm,RMS 0.108μm提升到最终的PV0.13μm,RMS0.012μm.实验表明,去除函数预测模型能够优化磁流变抛光工艺,提高加工的确定性和增强工艺的适用性,实现光学镜面的高精度确定性磁流变抛光加工.     

基于矩阵运算的光学零件磁流变加工的驻留时间算法

提出了一种光学零件磁流变加工的驻留时间计算方法.该算法以矩阵运算为基础,首先确定工件上各个控制节点的高度余量,并将磁流变抛光模对各控制节点的材料去除能力体现到去除矩阵中,然后利用非负最小二乘法求解驻留时间向量.采用该算法在自行研制的磁流变抛光机床上进行抛光实验,经过2次迭代加工后,有效口径为145mm的球面镜P-V值达到40.5nm(约为λ/15),RMS值达到5nm(约为λ/125),表面粗糙度Ra值达到0.57nm.     

热压多晶氟化镁的磁流变抛光研究

热压多晶氟化镁是一种被广泛应用的红外光学材料.磁流变抛光因其抛光效率高、磨头无磨损、可实现确定性加工等优点而日益成为倍受瞩目的超精密光整加工技术.在利用传统抛光方法得到热压多晶氟化镁的抛光特性的基础上配制了适用于该材料的磁流变抛光液.通过抛光实验证明,与传统抛光方法相比,采用磁流变抛光方法对热压多晶氟化镁进行抛光,可以得到较好抛光表面质量,并且抛光的效率也大大提高.     

化学气相沉积碳化硅超光滑抛光机理与表面粗糙度影响因素

为实现化学气相沉积碳化硅(CVD SiC)的超光滑抛光,采用纳米划痕试验研究了化学气相沉积碳化硅脆塑转变的临界载荷,根据单颗磨粒受力对其抛光机理进行了分析,并从材料特性、工艺参数以及抛光液pH值三个方面对其表面粗糙度影响因素进行了系统的试验研究.研究结果表明:化学气相沉积碳化硅的稳定抛光过程是磨粒对碳化硅表面的塑性域划痕过程;CVD SiC的晶粒不均匀与表面高点会降低晟终所能达到的表面质量;表面粗糙度在一定范围内随磨粒粒度增加呈近似线性增长,随抛光模硬度的增加而增长;抛光压强对表面粗糙度的影响规律与抛光模的变形行为相关,当抛光模处于弹性或弹塑性变形阶段时,表面粗糙度随抛光压强的增加呈小幅增长,而当抛光模包含塑性变形之后,表面粗糙度基本与抛光压强无关;此外,抛光速度和抛光液pH值对表面粗糙度的影响不大.研究结论为CVD SiC超光滑抛光的工艺参数优化选择提供了定量的试验依据.     

基于CFD的磁射流抛光去除机理分析

应用计算流体动力学(CFD)方法分析了一种新型精密抛光技术——磁射流抛光的材料去除机理。磁射流抛光中,含有磨料的磁流变液射流被喷嘴出口附近的局部外加纵向磁场磁化,产生准直的硬化射流束来进行相对远距离的精密抛光。介绍了磁射流抛光的原理和实验装置,分析了磁流变液聚束射流的形成,通过一系列定点抛光实验研究了磁射流抛光工艺的材料去除分布特征,利用计算流体动力学的方法分析了垂直冲击和倾斜冲击情况下,磁流变液射流与工件表面相互作用时径向流场功率密度的分布特征。实验结果和仿真计算结果表明:磁流变液射流在工件表面径向扩展流动产生的径向剪切作用导致了材料去除;CFD方法能模拟抛光区去除率的三维分布,因此可以准确地预测抛光区形状。     

微波铁氧体基片精密研抛技术研究

针对微波铁氧体基片的功能要求和材料特性,基于坐标变换法对平行式研磨、抛光加工区域的相对运动轨迹进行仿真研究,为合理选择工艺参数提供理论依据;通过正交化实验分析各种工艺参数对研磨效率的影响规律;在此基础上,采用优化组合的工艺参数进行微波铁氧体基片平行式研磨和抛光加工,技术指标均达到或超过了使用要求。     

Terrorism,insurgency, kidnapping,and security in Africa's energy sector

Energy continues to serve as the bedrock of modern economies and the main driver of modern society. For Africa, the production and supply of energy resources such as crude oil, natural gas, uranium, coal, biomass, biofuels and other renewables are an important source of employment, rents, taxes, royalties and profits. This sector brings in several tens of billions of dollars of revenue annually. The production and delivery of such resources, however, depend on critical infrastructures such as pipelines, refineries, processing plants, terminals, rigs, electrical energy pylons, substations, pump stations, vessels, and tankers. These infrastructures have been attacked by terrorists, insurgents, vandals and saboteurs, all of whom see them as targets against which to register their grievances and extract concessions from the state. This paper is a chronological account of some of the documented incidents of terrorism, insurgency, kidnapping, destruction, sabotage, and human casualties suffered in the oil and gas sectors in Africa between 1999 and 2012. It is based on data extracted from the databases of the RAND Database of World Terrorism Incidents and the University of Maryland's Global Terrorism Database (GTD).     

Helping hands: civil–military cooperation and Italy's military operation abroad

In the Post-Bipolar Era the growing complexity of the military operations requires a new approach for the resolution of international crises. Since the end of the Cold War, peace support operations (PSO) have become the mainstay and principal occupation of most Western armies. At the same time, Italy has been one of the most important actors in such an area. The article focuses on the cooperation between military and civil components (a process called CIMIC) as a key variable in the Italian PSOs. We will analyse in detail the main lessons learned from past military interventions as well as the general context in which new tendencies are taking place. The maintaining of a minimum security frame becomes essential to fulfil activities ‘collateral’ to the mission: reconstructing services and infrastructure, food distribution, water and medication, law and order, de-mining, training of local forces, and supporting local institutions. These are the main tasks to obtain thrust and support from the population.     

Tacit support for terrorism: The rapprochement between the USSR and Palestinian guerrilla organizations following the 1967 war

This article demonstrates the inconsistent and wavering Soviet attitude towards national liberation movements in general and the Palestinian organizations in particular. Until the late 1960s, the Soviets viewed these organizations with suspicion, hesitating to engage in political dialogue with them. However, in the 1970s, political and military events in the region, as well as modifications in the Kremlin's Cold War strategies, led to a general shift towards the Middle East in Soviet foreign policy. Soviet leaders showed increased willingness to provide certain Palestinian organizations with arms with which to conduct terrorist activities against Israeli, pro-Israeli, Jewish and Western targets. The article explores the complex relations between Palestinian organizations and the USSR in the field of international terror. The study also exposes and analyzes the nature and content of Soviet–Palestinian arms dialogues and transactions. It provides clear evidence that Soviet policymakers and other luminaries were fully informed of, and sometimes directly involved in, these transactions and dialogues at the highest levels.     

A1 Qaeda and the radical Islamic challenge to western strategy

The September 11 global crisis prompted by the attacks on the World Trade Center and the Pentagon raises major questions concerning the nature and trajectory of terrorism in the post-Cold War global order. Hitherto, terrorism has been largely debated by analysts at the level of nation states. Terrorist and insurgent movements have also been largely anchored in nationalist and ethnic power bases even when they have sought to mobilise a transnational ideological appeal on religious or class grounds. There have been a few exceptions to this pattern such as the alliance between the German Baader-Meinhof group and the Japanese Red Army Faction, but even such international alliances as this did not, until at least the 1980s, presage anything like a global terrorist network necessitating a global strategic response. This study examines terrorism and global strategic responses.     

Helping hands: external support for the KNU insurgency in Burma

This article analyses to what extent the Burmese KNU insurgency made use of external support from states, refugees, and diasporas. Based on extensive fieldwork it is concluded that support from neighbouring states and refugees has for years kept the Karen rebellion alive. Western countries perceived forms of resistance to the illegitimate Burmese regime as just and have therefore played a crucial role in the continuation of conflict in Karen State. It is important that policymakers and donors as well as executing organizations continue to reflect critically on the way they exercise their work.     

基于GTST-DMLD-ESD的装备RMS建模仿真

装备的RMS是装备的重要设计参数,是影响战备完好和保障能力的关键因素.引入GTST-DMLD作为主要建模工具,建立起装备系统的RMS描述模型,以ESD为补充和扩展,对维修过程进行建模.并以GTST-DMLD-ESD模型作为装备RMS仿真的核心,对装备RMS仿真模型的总体框架进行了研究,并对各模块进行了较为详细的探讨.     

Cyber sheiks and grassroots jihadis: the war in Syria and the devolution of the Bosnian Salafi communities

ABSTRACT

What was the scope of the Bosnian jihadi participation in the war in Syria? Did the Bosnian volunteers tend to join one particular faction? Why did the Bosnian youngsters decide to join the holy war in the Levant? Was this an organized and hierarchical process or was this a grassroots movement? Last, were all the Salafis in Bosnia supportive of this dynamic or did this process cause internal frictions? These are some of the questions that this research will try to answer.     

Country survey XVI the defence sector in the economy of a declining superpower: Soviet Union and Russia, 1965-2001

The Soviet Union was able to develop a large military-industrial complex and become the world's second superpower despite deficiencies in its centrally planned economy because defence was given high priority status and special planning, rationing and administrative mechanisms were used to attain national security objectives. However, in the period 1976-85 the effectiveness of priority protection diminished and defence institutions experienced more of the problems typical of the shortage economic system. The heavy defence burden also created growing difficulties for the civilian economy. The attempts by the Gorbachev government to reform the defence sector and improve defence-economic relationships during perestroika (1985-91) uniformly failed. For most of the transition period, the Russian military-industrial complex has been adversely affected by its low priority status, cuts in defence spending, instability of the hybrid politico-economic system, and negative growth of the economy. The armed forces and defence industry have been reduced in size and their outputs of military services and equipment have fallen to low levels. Nevertheless, the Russian armed forces still have over one million troops, significant stocks of sophisticated conventional weapons, and a large nuclear arsenal. The government of President Putin has raised the priority of the defence sector, increased real defence spending, and adopted ambitious plans to revive Russian military power. It is likely, though, that tight resource constraints will hamper efforts to reform the armed forces and to upgrade weapons. By 2010 Russia will be an important, but not dominant, military power in Eurasia.     

Traffickers,terrorists, and a ‘new security challenge’: Russian counternarcotics strategy and the Federal Service for the Control of the Drugs Trade

The collapse of the Soviet Union precipitated the massive expansion of drug use and trade in Russia. The country now has one of the largest populations of injecting drug users in the world and has become the largest single-country market for Afghan heroin. In 2003 the Federal Service for the Control of the Drugs Trade was created to coordinate a comprehensive counternarcotics strategy appropriate to the scale of this threat. The service continues to face a number of challenges in its early stages of development. However, it has made considerable advances in improving responses to large-scale organised crime and in building international cooperation.