基于网络分析法的弹药生产响应能力影响因素

针对未来战场对弹药需求动态、突发、受任务冲击影响等特点,提出弹药生产响应能力概念,建立了任务冲击条件下弹药生产响应能力影响因素的指标体系。运用网络分析法,建立典型结构的弹药生产响应能力影响因素的网络模型,得出弹药生产响应能力的关键影响因素,为弹药生产响应能力分析与提高提供了科学研究方法。     

磁流变阻尼器响应时间仿真与试验研究

响应时间是磁流变阻尼器（Magnetorheological Damper,MRD）重要性能指标之一。为分析MRD响应时间及影响因素,建立了MRD动态响应模型,提出了一种基于Ansoft和Adams联合仿真分析MRD响应时间的方法,并通过仿真与试验相结合的方法分析了阶跃电流幅值、活塞运动速度以及系统刚度等因素对MRD响应时间的影响。仿真结果和试验数据表明：MRD响应时间随活塞速度和系统刚度的增大呈减小趋势,随阶跃电流幅值的升高呈增大趋势。同时证明通过联合仿真分析MRD响应时间和影响因素的方法是有效的。     

Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

有界波模拟器频率特性研究

通过数值计算,研究了快上升沿电磁脉冲信号在有界波模拟器中的传输特性。采用矩量法(MoM)结合快速多极子(FMM)方法,对模拟器在传输不同上升沿电磁脉冲信号时内部的电场波形分别进行了计算。理论分析了有界波模拟器的频率特性,确定了该模拟器所能模拟电磁脉冲上升沿的上限,其结论对设计上升沿2~3ns的大型电磁脉冲场模拟设备具有一定的参考意义。     

未确知性信息的证据理论合成及其应用

针对在装备管理中所采用的专家评估法存在着未确知性现象,提出了一种基于D-S证据合成理论来融合未确知性信息的方法.从而,将每名专家的意见综合为专家组的一致意见,使评估结果更合理.最后,通过实例说明该方法的有效性.     

一种发动机万有特性曲面拟合的新方法

通过分析发动机实测试验数据,提出了燃油消耗率同转速和扭矩之间存在类似幂指函数的关系,运用多元回归的方法对发动机的万有特性曲面进行了拟合,对拟合结果用数理统计的方法进行了检验,最后指出对发动机万有特性曲面的拟合采用分段函数进行数值计算,将得到更为精确的结果。     

新疆城乡二元结构的特征与对策研究

总体水平低下,城镇发展滞后、区域内发展极不平衡、固化特征明显,是新疆二元结构的基本特征。本文从社会主义新农村建设的视角,分析新疆城乡二元结构的具体表现,并从对二元结构基本特征的分析中,探求促进新疆社会主义新农村建设的基本对策和制度诉求。     

温度场对机枪动力特性的影响

现代机枪重量较轻,要达到理想的射击精度就必须保证良好的动力匹配关系。机枪在射击过程中,枪管温度的升高直接影响机枪的动力特性。对某型机枪射击过程中枪管温度场及其对机枪动力特性的影响进行了分析,结果表明,温度变化对机枪动力特性改变的影响较小。