基于VCSEL实时点到点OFDM光信号在MMFs中的传输

通过实验,在使用未冷却直调3.63 GHz垂直腔面发射激光器的简单强度调制和直接检测系统中,首次证明在800 m OM2多模光纤上采用正交频分复用技术进行64 QAM(正交幅度调制)编码实现实时点到点通信,传输速度为11.25 Gb/s,功率损失1 d B。     

三维石英纤维增强氮化物基复合材料的烧蚀性能及显微结构

采用先驱体转化法制备了三维石英纤维增强氮化物基复合材料(3D SiO2f/Si3N4-BN),用等离子射流烧蚀方法研究了复合材料的烧蚀性能,运用扫描电镜及能谱仪对烧蚀表面微观形貌进行了观察和分析。结果表明氮化物基复合材料在高压高热流等离子体烧蚀下线烧蚀率为0.91mm/s,石英纤维熔融并被吹除带走了大量的热量,熔融层抑制了基体的机械剥蚀。基体由于强度高、升华温度高,延缓了熔融层的吹除,表明氮化物基复合材料是一种良好的耐高温烧蚀透波材料。     

聚铝碳硅烷的流变性和纺丝性研究

采用单孔纺丝装置对不同铝含量的聚铝碳硅烷(PACS)的流变性和流变性进行研究.结果表明:随着温度升高,PACS熔体的流体特性逐渐接近牛顿流体;PACS熔体粘度对温度有强烈的依赖性,其软化点在190℃～220℃范围时,其粘流活化能在190～260kJ/mol之间;当PACS的粘度在100Pa·s左右时可纺性好;铝含量对PACS的流变性能和可纺性有重要的影响,随着铝含量的增加,PACS熔体的粘度增大,因而PACS的纺丝温度更高,可纺性变差.     

红外隐身一维光子晶体结构反射特性的理论分析

利用传递矩阵方法，研究作为红外隐身材料的PbTe／Na3A1F6一维光子晶体结构在中远红外波段的反射特性。结果表明：PbTe／Na3AlF6复合光子晶体结构在3～5μm和8～14μm波段具有很高的反射率。这为装备在中远红外的隐身应用提供了有益的探索。     

超连续谱激光光源研究进展

高非线性光纤制造技术的成熟和光纤激光器性能的提升,极大地促进了超连续谱光源的快速发展,以光纤为非线性介质的超连续谱的产生成为当前研究热点。从可见光、近红外和中红外3个不同波段,综述了超连续谱产生的技术方案与最新进展。当前,可见光和近红外波段的超连续谱光源输出功率已经突破百瓦量级,并出现了多芯光子晶体光纤、光纤放大器和随机光纤激光器产生超连续谱等众多新方案;以氟化物光纤和亚碲酸盐光纤为非线性介质的中红外超连续谱,输出功率也突破了十瓦量级;在光谱拓展方面,以硫系光纤为非线性介质的超连续谱,输出光谱已扩展到12μm以上。     

一维光子晶体反射镜的光学能带结构

运用传递矩阵方法计算了作为反射镜的碲化铅/冰晶石一维光子晶体的光学能带结构,并研究了其禁带和相对带隙宽度随晶格周期和碲化铅的填充因子的变化。     

Effect of transverse compression on the residual tensile strength of ultrahigh molecular weight polyethylene (Dyneema® SK-76) yarns

Ballistic impact induces complex stress states on fiber-based armor systems. During impact fibers undergo multiaxial loading which includes axial tension, axial compression, transverse compression, and transverse shear. Transverse compression induced by the projectile leads to permanent deformation and fibrillation of fibers resulting in degradation of material tensile strength. Previous work (Sockalingam et al. Textile Res. J 2018) has shown a reduction of 20% in the tensile strength of Dyneema® SK76 single fibers subjected to 77% nominal transverse compressive strains. Experimental investigation of quasi-static transverse compression on Dyneema® SK-76 yarns, unconstrained in the lateral direction, indicate an average of 4% reduction in tensile strength of yarns compressed to 77% nominal strains. In this work we use finite element modeling techniques to understand the difference in residual tensile strength between single fibers and yarns observed in laterally unconstrained transverse compression experiments. Finite element study of the transverse compression response of single fibers and yarns indicate that local strains developed in fibers within the yarn are much lower than the local strains developed in single fibers subjected to a given nominal strain and may explain the less reduction in strength observed in yarns.