Some comparisons of residual life of coherent systems with exchangeable components

Most of the research, on the study of the reliability properties of technical systems, assume that the components of the system operate independently. However, in real life situation, it is more reasonable to assume that there is dependency among the components of the system. In this article, we give sufficient conditions based on the signature and the joint distribution of component lifetimes to obtain stochastic ordering results for coherent and mixed systems with exchangeable components. Some stochastic orders on dynamic (or conditional) signature of coherent systems are also provided. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 549–556, 2014     

复合材料专题-Si(Al)C纤维先驱体聚铝碳硅烷的合成*

采用低分子量固态聚碳硅烷(PCS)和乙酰丙酮铝([Al(acac)3])为原料,利用Si-H与[Al(acac)3]之间的交联反应合成适于多孔连续熔融纺丝的聚铝碳硅烷(PACS)。研究了反应条件对产物数均分子量、软化点和组成结构的影响及交联反应程度和可纺性之间的联系。结果表明,随着反应温度的升高和时间的延长,反应程度提高,残余乙酰丙酮基减少,Si-O-Al交联支化结构增多,分子量和软化点增大,可纺性随之下降。当[Al(acac)3]投料比为8wt%时,在370°C下反应4-6h,可得到软化点为206~221°C,Alwt%=0.68%,具有良好可纺性的PACS     

Warranty costs: An age‐dependent failure/repair model

An age‐dependent repair model is proposed. The notion of the “calendar age” of the product and the degree of repair are used to define the virtual age of the product. The virtual failure rate function and the virtual hazard function related to the lifetime of the product are discussed. Under a nonhomogeneous Poisson process scenario the expected warranty costs for repairable products associated with linear pro‐rata, nonrenewing free replacement and renewing free replacement warranties are evaluated. Illustration of the results is given by numerical and graphical examples. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

基于能量度量的星载AIS信号自适应码元同步抽取算法

基带信号码元同步抽取是目前星载AIS(Automatic Identification System)信号处理中的一个难点问题,针对过零检测和迟门早门等现有算法存在的不足,提出了基于能量度量的基带信号自适应码元同步抽取算法。将基带信号根据采样率和码速率的比值分割成相同的段的组合,之后分别计算每个段内相应样点的能量度量,最后选择使能量度量最大时的样点集作为最优同步抽取样点,该样点集具有最大信噪比。仿真结果验证了该算法误码率优于过零检测和迟门早门算法。     

扩链剂对TDI封端聚醚预聚物反应速度的影响

用FTIR研究了不同活性的扩链剂对TDI封端PPG预聚物固化速度和反应动力学的影响.结果表明:3种扩链剂与TDI封端PPG预聚物固化反应速度分别按1,3丁二醇、1,4丁二醇、MOCA的顺序增加,室温下3种扩链剂在固化前期均遵循二级反应动力学规律,其固化反应为二级反应,因此不同活性的扩链剂不影响TDI封端PPG预聚物固化反应的反应级数.     

采用PWPF调节器的再入飞行器最优控制分配方法

针对具有反作用控制系统(Reaction Control System,RCS)和气动舵两类控制机构的再入飞行器,提出一种基于脉宽脉频(Pulse-Width Pulse-Frequency,PWPF)调节器的最优控制分配方法。将RCS的输入信号转化为连续变化量,RCS与气动舵的控制分配问题被描述为二次规划问题,并采用有效集方法对其求解。采用离散法和PWPF调节器将优化结果转化为RCS的开关机状态。与混合整数规划问题相比,连续二次规划问题更容易求解,计算速度更快。通过对二次规划问题的重构,该算法能有效地应对故障情况。     

Burning rate and other characteristics of strontium titanate (SrTiO3) supplemented AP/HTPB/Al composite propellants

In a quest of search for a new burning rate modifier for composite propellant, strontium titanate (SrTiO₃), a perovskite oxide has been chosen for evaluation in a composite propellant formulation based on its other catalytic applications. Initially, SrTiO₃ was characterized for particle size, morphology and material/phase identification (using XRD). By varying SrTiO₃ content in a standard composite propellant, different compositions were prepared and their performance and processing parameters like the end of mix (EOM) viscosity, mechanical properties, density, burning rate, pressure exponent (n-value), etc. were measured. The results reveal that 2% SrTiO₃ causes more than 12% enhancement in propellant burning rate (at 70 ksc pressure) in comparison to the standard propellant composition. The pressure exponent also increases to 0.46, whereas the standard composition was having its value as 0.35.     

靴形喷油速率耦合预喷射对超高压共轨柴油机性能的影响

在介绍超高压共轨系统工作原理的基础上,基于GT-Power软件建立单缸超高压共轨柴油机的仿真模型,并利用试验验证模型的准确性,而后通过模型分析不同喷油速率、靴形喷油速率耦合不同预喷油量和靴形喷油速率耦合不同预喷提前角对超高压共轨柴油机动力性、经济性以及燃烧排放特性的影响。结果表明:通过调整超高压共轨系统中电控增压器电磁阀和喷油器电磁阀的开启时间,能够实现喷油速率的柔性可调。随着喷油速率从矩形变化到靴形,柴油机缸内压力、温度以及NO_x排放量均逐渐降低,而soot排放量逐渐升高,且靴形喷油速率可使柴油机获得最大的功率(扭矩)和最低的油耗率。靴形喷油速率耦合较小的预喷油量可以使柴油机获得更好的动力性、经济性和燃烧特性,但同时也会导致NO_x排放量的升高。靴形喷油速率耦合较大的预喷提前角有助于改善柴油机排放特性,但受到预喷油量的限制,效果并不明显。     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.