玻璃瓶动态图像检测运动模拟平台

动态图像检测中,如何在指定位置快速而准确地捕捉到运动物体的图像是最基本的环节。试验验证图像检测装置的成像特性,成为动态图像检测研究的重要内容之一。以变频器控制电动机为核心,通过变频器内部参数编程和外部简单的辅助控制电路,构建了运动平稳、速度可调、具有自动保护功能的模拟平台。该平台适于动态图像检测中普通运动物体的快速模拟,已成功地用于玻璃瓶动态图像装置中,达到了预期目的。     

基于调整型的战术导弹批检试验抽样方案设计

为通过批检试验准确检验导弹的质量,提出基于调整型的战术导弹批检试验抽样方案设计思路。调整型抽样检验方法的应用,可适时调整抽样方案的宽严程度,提高检验效率,并为订货方和生产方提供适当的风险保护,把抽样检验和导弹的质量变化联系在一起形成一个动态检验过程。     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

新型技术设备在护照证件识别中的应用

在各种偷渡行为中,持用伪假护照证件非法出入境是犯罪分子最常用的手段,随着新技术的发展,其伪造手段也向高技术、专业化方向发展。因此,提升护照证件的防伪技术,运用先进技术及新型设备鉴别伪假护照证件,已成为边防管理工作的关键所在。结合现阶段口岸查验中出现的伪假护照证件的主要造假手段,对先进技术及设备在边防检查工作中的应用进行了一些有益探索。     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

红外技术及其在消防领域中的应用

介绍红外技术及其在消防领域中的应用,其应用主要包括电气防火检查、火灾探测、火情侦察和灭火救援等方面.     

自动武器可靠性寿命分布规律研究

本文对两种具有代表性的自动武器收集其生产验收寿命试验的故障记录,经处理得出寿命子样,再用皮尔逊检验进行分布函数检验,从中发现自动武器寿命分布服从指数分布,为研究自动武器可靠性指标及其验收方法提供了理论依据。     

基于状态的检查与修理综合决策模型

分析了单部件系统退化过程的特点，建立了基于状态的检查与修理决策模型。该模型根据系统的当前状态来决定检查与修理，通过分析计算系统在一个更新周期内平均检查次数、预防性维修及修复性故障的概率，建立维修费用与检查问隔及预防性维修阈值的关系，以平均维修费用最小为目标，优化检查间隔及预防性维修阈值。最后运用Matlab对模型进行数值计算，结果表明，模型能有效地降低维修费用。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

基于高阶累积量与神经网络的干扰识别算法

研究了一种基于高阶累积量和神经网络的干扰识别算法。该方法把卫星通信中常见的各种干扰信号的归一化高阶累积量作为分类特征参数,应用神经网络对特征参数进行分类训练,将接收干扰信号的归一化高阶累积量输入已训练的神经网络进行干扰类型的识别。试验结果表明:该算法在低干信比的情况下具有较高的识别准确率。