Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

舰船电缆热老化寿命的研究

介绍了某船用电缆热老化寿命研究的有关试验和结果分析．对电统绝缘材料失效的判断、机械性能变化的预测,以及如何根据电缆的负载情况和周围的环境温度确定绝缘材料的老化温度等,提出了相应的观点和方法．     

基于不确定性理论的研制技术风险评估方法研究

分析了装备研制技术风险的含义,根据技术风险的特点建立了评价技术风险的指标体系。在技术风险度量中引入不确定性理论的概念,并建立了基于不确定性的技术风险的度量方法,对综合技术风险进行评价。最后通过实例验证了综合评价方法的可用性。     

陆军诸兵种合同作战兰切斯特方程的弹药消耗预测研究

描述了诸兵种合同作战的兰切斯特方程及其矩阵解,提出了一种通过兵力损耗换算弹药损耗的新思路,分析和确定了用该方法预测弹药消耗的相关参数,最后运用Matlab进行仿真计算,预测出了武器装备战损情况和弹药消耗情况。     

美军作战实验室建设研究

简要回顾了美军作战实验发展的历史,从军种到联合详细阐述了美军作战实验室完整的体系,并简要介绍了各作战实验室所完成的典型实验,研究了美军作战实验室主要的实验方法和技术手段,剖析了美军作战实验室的运行机制,探讨了美军作战实验室建设带给我们的启示。     

镁合金表面电弧喷涂Fe基非晶纳米晶涂层的性能

采用自动化高速电弧喷涂技术在镁合金基体上制备了FeCrBSiMoNbW非晶纳米晶涂层。采用Flir A20M型红外热像仪对Fe基非晶纳米晶喷涂层的表面温度场进行了实时监测。对Fe基非晶纳米晶涂层和传统的3Cr13涂层的组织结构、力学性能以及摩擦学性能进行了对比分析。实验结果表明：Fe基非晶纳米晶涂层组织致密,孔隙率低,具有相对较高的硬度和拉伸结合强度;形成了非晶相和纳米晶相组成的复合结构,使得涂层具备较好的耐磨减摩性能。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。