Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

注意力机制量化剪枝优化方法

面向基于注意力机制模型的巨大计算和访存开销问题,研究量化和剪枝协同优化的模型压缩技术,提出针对注意力机制中查询、键、值、概率共四个激活值矩阵的对称线性定点量化方法。同时,提出概率矩阵剪枝方法和渐进式剪枝策略,有效降低剪枝精度损失。在不同数据集上的实验结果表明,针对典型基于注意力机制模型BERT,在较低或者没有精度损失的情况下该优化方法可达到4位或8位定点量化、0.93～0.98的稀疏度,大幅度降低模型计算量,为加速量化稀疏模型的推理奠定良好的基础。     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

电磁干扰预测在频率方案选择中的应用

应用电磁干扰预测的原理 ,针对一体化通信指挥系统中 ,多部电台集中使用所带来的频率管理问题 ,进行了干扰多级预测 ,得出了保证电磁兼容性系统各电台之间应满足的频率间隔 ,提出了通信网中通信频率方案     

一类非线性问题的数值分析

利用Ｌａｐｌａｃｅ方程的基本解,将变系数非齐次Ｈｅｌｍｈｏｌｔｚ偏微分方程的边值问题化为积分方程问题。再用边界无法进行离散,并对区域结点及边界结点的方程耦合求解。文末算例表明本文方法能够达到较高精度。     

利用软件仿真的方法研究信号完整性问题

通过软件仿真的方法研究了信号完整性问题中的信号反射。以实例的形式给出了一种利用仿真估计电路临界频率的方法。在设计开发的早期,利用软件仿真可以得到非常有价值的信息。     

等离子体干扰巡航导弹研究

等离子体干扰技术作为一种全新的概念,日益受到人们的关注。根据GPS系统制导巡航导弹的特点和等离子体对电磁波传输的影响,探索了一种等离子体抗巡航导弹(GPS制导)新途径。对干扰所需最小等离子体自由电子数密度进行了估算,分析了该途径干扰对抗巡航导弹的可行性,为防御巡航导弹提供了理论依据及数据参考。     

关于磁传感器设计中的技术问题

目前,通常使用的CCY-1G型测磁仪已初步采用了模块化和计算机技术.在此基础上,立足于现有的技术水平,研究了利用计算机处理数据的强大功能分析设计磁传感器的特性(如激励电压的大小、频率;铁芯参数、形状等),缩短了磁传感器的设计时间.同时,对不同激励波形(正弦波、方波、三角波)下磁传感器的输出进行分析比较,得出方波是目前较理想的激励波形的结论,对今后磁传感器的分析与设计有一定的指导意义.     

基于不确定性理论的研制技术风险评估方法研究

分析了装备研制技术风险的含义,根据技术风险的特点建立了评价技术风险的指标体系。在技术风险度量中引入不确定性理论的概念,并建立了基于不确定性的技术风险的度量方法,对综合技术风险进行评价。最后通过实例验证了综合评价方法的可用性。