催化反应中的次谐分枝

研究一类描述催化反应的flickering现象的动力系统,应用Melnikov方法对三种不同情形分别给出了系统存在次谐分枝的某些充分条件。     

坦克炮、反坦克炮简易火控系统自动调炮精度分析

本文分析了坦克炮、反坦克炮简易火控系统自动调炮装置的结构特点及调炮误差变化规律,提出了工程上的校准方法及设计要点。     

空空导弹越肩发射初制导转弯控制与仿真

针对空空导弹越肩发射初制导俯仰平面180°转弯,提出了一种基于最优控制理论的最优转弯方法,该方法是确定一个最佳推力方向角,使转弯完成时导弹的末端速度最大。建立了简化的用于姿态控制的姿态动力学模型,采用反作用喷气控制系统(RCS)设计了导弹的姿态控制律。对空空导弹180°转弯的飞行过程进行了仿真并给出分析结果。     

United Nations rapid reaction mechanisms: Toward a global force on standby?

This article analyses the main challenges and future prospects of creating United Nations (UN) rapid reaction mechanisms, particularly in the light of past attempts and current discussions about a “UN Vanguard Force” in the wake of the High-Level Panel on Peace Operations report. The article reviews major initiatives (in particular lessons from the Standby High Readiness Brigade for UN Operations) and assesses the main achievements, failures, and challenges related to past UN-led rapid reaction mechanisms. In line with the overall aim of this special forum, the article highlights the future potentials and institutional, operational, financial, and political challenges that need to be overcome in order to design and create a pragmatic and effective rapid reaction tool at the disposal of the UN.     

复合材料专题-Si(Al)C纤维先驱体聚铝碳硅烷的合成*

采用低分子量固态聚碳硅烷(PCS)和乙酰丙酮铝([Al(acac)3])为原料,利用Si-H与[Al(acac)3]之间的交联反应合成适于多孔连续熔融纺丝的聚铝碳硅烷(PACS)。研究了反应条件对产物数均分子量、软化点和组成结构的影响及交联反应程度和可纺性之间的联系。结果表明,随着反应温度的升高和时间的延长,反应程度提高,残余乙酰丙酮基减少,Si-O-Al交联支化结构增多,分子量和软化点增大,可纺性随之下降。当[Al(acac)3]投料比为8wt%时,在370°C下反应4-6h,可得到软化点为206~221°C,Alwt%=0.68%,具有良好可纺性的PACS     

扩链剂对TDI封端聚醚预聚物反应速度的影响

用FTIR研究了不同活性的扩链剂对TDI封端PPG预聚物固化速度和反应动力学的影响.结果表明:3种扩链剂与TDI封端PPG预聚物固化反应速度分别按1,3丁二醇、1,4丁二醇、MOCA的顺序增加,室温下3种扩链剂在固化前期均遵循二级反应动力学规律,其固化反应为二级反应,因此不同活性的扩链剂不影响TDI封端PPG预聚物固化反应的反应级数.     

采用PWPF调节器的再入飞行器最优控制分配方法

针对具有反作用控制系统(Reaction Control System,RCS)和气动舵两类控制机构的再入飞行器,提出一种基于脉宽脉频(Pulse-Width Pulse-Frequency,PWPF)调节器的最优控制分配方法。将RCS的输入信号转化为连续变化量,RCS与气动舵的控制分配问题被描述为二次规划问题,并采用有效集方法对其求解。采用离散法和PWPF调节器将优化结果转化为RCS的开关机状态。与混合整数规划问题相比,连续二次规划问题更容易求解,计算速度更快。通过对二次规划问题的重构,该算法能有效地应对故障情况。     

反应法制备SiC涂层组成与结构

采用反应法在C/SiC复合材料表面制备SiC致密涂层,利用XRD分析涂层的组分及晶体结构,利用扫描电镜及金相显微镜观察涂层的断口及表面形貌,并对涂层形成过程进行了分析。结果显示:涂层主要由SiC及少量的游离Si组成,致密不开裂的SiC涂层与C/SiC复合坯体之间有很好的梯度过渡结构;相反,涂层与坯体之间如果没有形成过渡层,涂层会因热残余应力过大而开裂;反应法制备不开裂SiC涂层与CVDSiC涂层有很好的热匹配性,同时在其表面制备的CVDSiC涂层无点缺陷。     

消防应急救援过度应激反应及对策研究

重大灾害应急救援已经成为消防部队重要的作战任务之一,通过应激反应分类、危害性等情况研究,分析消防部队进行重大灾害救援时产生的心理影响,提出了事前、事中及事后三个不同阶段应采取的不同干预措施,对保证消防部队有效完成重大灾害救援作战任务,提高消防部队灭火救援能力具有重要意义。     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.